0

Performance Camshafts

How do you want your engine to pull: right from idle, or only high up in the rev range? The camshaft controls when and for how long the valves open, and with that the character of the engine. This category contains performance camshafts with hydraulic flat tappets for you who are building a street project or a track engine.

What a performance camshaft changes

The cam profile determines the valves' duration, lift and overlap. Longer duration typically moves the power higher up the rev range, while the idle can become rougher and the vacuum lower. In product names such as Thumpr 227/241, the numbers typically indicate the duration in degrees for intake and exhaust respectively. The camshafts in this category come from COMP Cams.

How to choose a camshaft

  • Engine type: The camshaft must fit your specific engine, e.g. Ford 351W, Ford 221-302 or Pontiac 265-455. Always check the part number.
  • Use: A street car and a track car place different demands on idle, vacuum and rev range.
  • The rest of the engine: Compression, intake, exhaust and gearing affect which profile works best.
  • Valvetrain: The lift must match the valve springs and valve geometry.

If you are looking for other profiles or lifter types, you can browse the full category of camshafts.

Installation and break-in

Flat tappet camshafts typically require a careful break-in during the first minutes after start-up, with the correct assembly lube and an oil with sufficient wear protection. Use new lifters together with a new camshaft, and follow the manufacturer's instructions for timing and valve springs. If several parts of the valvetrain need replacing, you can compare with the other camshafts and related parts.

Frequently asked questions

What do numbers like 227/241 in the product name mean?

They typically indicate the cam's duration in degrees for intake and exhaust, measured at a specified lift. Higher numbers typically move the power higher up the rev range, but the effect also depends on lift, overlap and the rest of the engine.

Can I reuse my old lifters with a new camshaft?

With a flat tappet camshaft you should typically always use new lifters. Old lifters have worn in against the old cam and can damage the new camshaft during break-in.

Does a new camshaft affect inspection and emissions?

It can, as a different profile can change exhaust emissions, idle and sound. Whether the car can be approved depends on the product and the car, so check the rules for your specific project and part number before installation.

View as Grid List
Sort by
Display per page