0

Water/Methanol Injection Kits

Does your intake temperature climb as boost pressure goes up? With water/methanol injection, a fine mist is sprayed into the intake air, which can lower the temperature and reduce the risk of knock. Here you'll find complete kits, nozzles and controllers for you who have a turbocharged or supercharged engine and want more stable performance under load.

How water/methanol injection works

A system typically consists of a tank, pump, lines, one or more nozzles and a controller that determines when and how much fluid is injected. As the water evaporates, it absorbs heat from the air, so the intake air can become cooler and denser, and the methanol can also increase knock resistance. The effect depends on the engine, boost pressure and the engine management tune, and the system typically complements your other air and fuel cooling. In this category you'll find brands such as AEM, Snow Performance and Nitrous Express.

How to choose kit, nozzles and controller

  • Complete kit or individual parts: complete water/methanol kits bring the parts together in one package, and some are available without a tank if you have room for your own.
  • Controller: the AEM V3 kit has an internal MAP sensor up to 2.4 bar (35 psi) and is also available in a Multi Input version. Snow Performance offers, for example, a Stage 2 kit with a programmable controller. See also water/methanol controllers.
  • Nozzles: the flow must match the engine's power and airflow – too much fluid can cause misfires, too little gives poor cooling. Find water/methanol nozzles in several sizes.
  • Tank and lines: for example AEM with a 3.8-litre tank and built-in level sensor, or Snow Performance with stainless braided line and 4AN fittings.

Installation and maintenance

Nozzle placement in the intake depends on the project, and lines should be routed away from heat and moving parts. Regularly check the filter, nozzle and connections for clogging and leaks, and remember that pure water can freeze in the tank during winter. If you raise your power target significantly, also check whether your fuel pumps and regulators can keep up.

Frequently asked questions

Should I use pure water or a mix of water and methanol?

It depends on the system and your project. Pure water can cool the intake air, while methanol can also increase knock resistance but is flammable. Follow the manufacturer's recommended mixing ratio, and use distilled water so the nozzle and filter don't scale up.

Can water/methanol injection replace an intercooler?

Typically not. The injection only works when the controller activates it, for example at high boost, while the intercooler cools all the time. The two solutions often complement each other, and the need depends on the engine and power target.

What happens if the tank runs dry?

If the engine management is tuned for fluid being injected, an empty tank can increase the risk of knock. A tank with a level sensor, as in the AEM V3 kit with a 3.8-litre tank, makes it easier to keep an eye on the level.

Can I fit water/methanol injection to a road-registered car?

It depends on the product and the car. Modifications that affect engine performance may require inspection and approval, so check the documentation for the specific part number and clarify it with a vehicle inspection centre before installation.

View as Grid List
Sort by
Display per page

Methanol Boot - SNO-40110-BOOT6

snoSNO-40110-BOOT6
Snow Performance 6in Water Methanol Boot w/Nozzle Holders Installed
887,91 € excl. VAT

Nozzle Holder - SNO-812-BRD

snoSNO-812-BRD
Snow Performance Low Profile Water Nozzle Holder (3AN Straight)
217,72 € excl. VAT

Nozzle Holder - SNO-900

snoSNO-900
Snow Performance Nozzle Holder Straight (Rectangle Style)
329,32 € excl. VAT

Stage 3 Controller - SNO-60003

snoSNO-60003
Snow Performance Stage 3 Diesel Controller
3.118,46 € excl. VAT

Stage 3 Controller - SNO-60061

snoSNO-60061
Snow Performance Stage 3 Port Injected Engines Controller
3.129,78 € excl. VAT

Stage 3 Controller - SNO-60300

snoSNO-60300
Snow Performance Stage 3 Gas Direct Injection Water Methanol Controller
3.117,30 € excl. VAT

Stage 4 Controller - SNO-70000

snoSNO-70000
Snow Performance Stage 4 Boost Cooler Water Controller Upgrade
4.168,51 € excl. VAT

VC-100 Controller - SNO-60610

snoSNO-60610
Snow Performance VC-100 Direct Injection Water Methanol Controller
3.910,65 € excl. VAT

VC-50 Controller - SNO-60500

snoSNO-60500
Snow Performance Stage 2 Power Max Controller Upgrade (w/Black Bezel)
2.342,39 € excl. VAT

Water / Meth System - 15020

nex15020
Nitrous Express Water Injection Gas Stage I Boost
3.426,25 € excl. VAT

Water / Meth System - 15022

nex15022
Nitrous Express Water Injection Gas Stage II MAF
5.361,77 € excl. VAT

Water / Meth System - 15023

nex15023
Nitrous Express Water Injection Gas Stage II GM MAF
5.361,77 € excl. VAT

Water / Meth System - 15027

nex15027
Nitrous Express Water Injection Gas Stage 3
7.453,97 € excl. VAT

Water / Meth System - 15028

nex15028
Nitrous Express Water Injection Gas Stage 3 MPG Max
7.872,38 € excl. VAT

Water / Meth System - 15030

nex15030
Nitrous Express Water Injection Diesel Stage I
5.505,61 € excl. VAT

Water / Meth System - 15031

nex15031
Nitrous Express Water Injection Diesel Stage II
5.505,61 € excl. VAT

Water / Meth System - 15032

nex15032
Nitrous Express Water Injection Diesel Stage III
7.592,56 € excl. VAT

Water / Meth System - 15033

nex15033
Nitrous Express Water Injection Diesel MPG Max
9.306,97 € excl. VAT

Water / Meth System - 15040

nex15040
Nitrous Express Water Injection Low Flow Safety Switch
1.953,41 € excl. VAT

Water / Meth System - 15048

nex15048
Nitrous Express Water Electric Pump
1.604,45 € excl. VAT

Water / Meth System - 15120

nex15120
Nitrous Express Direct Port Water Injection 4 Cyl Stage 1
6.955,46 € excl. VAT

Water / Meth System - 15121

nex15121
Nitrous Express Direct Port Water Injection 6 Cyl Stage 1
8.277,12 € excl. VAT

Water / Meth System - 15121H

nex15121H
Nitrous Express Direct Port Water Injection 6 Cyl Stage 1 w/Hardlines
8.046,26 € excl. VAT

Water / Meth System - 15122

nex15122
Nitrous Express Direct Port Water Injection 8 Cyl Stage 1
8.422,82 € excl. VAT