0

Water/Methanol Injection Kits

Does your intake temperature climb as boost pressure goes up? With water/methanol injection, a fine mist is sprayed into the intake air, which can lower the temperature and reduce the risk of knock. Here you'll find complete kits, nozzles and controllers for you who have a turbocharged or supercharged engine and want more stable performance under load.

How water/methanol injection works

A system typically consists of a tank, pump, lines, one or more nozzles and a controller that determines when and how much fluid is injected. As the water evaporates, it absorbs heat from the air, so the intake air can become cooler and denser, and the methanol can also increase knock resistance. The effect depends on the engine, boost pressure and the engine management tune, and the system typically complements your other air and fuel cooling. In this category you'll find brands such as AEM, Snow Performance and Nitrous Express.

How to choose kit, nozzles and controller

  • Complete kit or individual parts: complete water/methanol kits bring the parts together in one package, and some are available without a tank if you have room for your own.
  • Controller: the AEM V3 kit has an internal MAP sensor up to 2.4 bar (35 psi) and is also available in a Multi Input version. Snow Performance offers, for example, a Stage 2 kit with a programmable controller. See also water/methanol controllers.
  • Nozzles: the flow must match the engine's power and airflow – too much fluid can cause misfires, too little gives poor cooling. Find water/methanol nozzles in several sizes.
  • Tank and lines: for example AEM with a 3.8-litre tank and built-in level sensor, or Snow Performance with stainless braided line and 4AN fittings.

Installation and maintenance

Nozzle placement in the intake depends on the project, and lines should be routed away from heat and moving parts. Regularly check the filter, nozzle and connections for clogging and leaks, and remember that pure water can freeze in the tank during winter. If you raise your power target significantly, also check whether your fuel pumps and regulators can keep up.

Frequently asked questions

Should I use pure water or a mix of water and methanol?

It depends on the system and your project. Pure water can cool the intake air, while methanol can also increase knock resistance but is flammable. Follow the manufacturer's recommended mixing ratio, and use distilled water so the nozzle and filter don't scale up.

Can water/methanol injection replace an intercooler?

Typically not. The injection only works when the controller activates it, for example at high boost, while the intercooler cools all the time. The two solutions often complement each other, and the need depends on the engine and power target.

What happens if the tank runs dry?

If the engine management is tuned for fluid being injected, an empty tank can increase the risk of knock. A tank with a level sensor, as in the AEM V3 kit with a 3.8-litre tank, makes it easier to keep an eye on the level.

Can I fit water/methanol injection to a road-registered car?

It depends on the product and the car. Modifications that affect engine performance may require inspection and approval, so check the documentation for the specific part number and clarify it with a vehicle inspection centre before installation.

View as Grid List
Sort by
Display per page

Meth Inject System - SNO-2130-BRD-T

snoSNO-2130-BRD-T
Snow Performance 05-10 Mustang Stg 2 Boost Cooler Water Inj Kit (SS Brded Line/4AN Fitting) w/o Tank
7.542,94 € excl. VAT

Meth Inject System - SNO-2132-BRD-T

snoSNO-2132-BRD-T
Snow Performance 11-17 Mustang Stg 2 Boost Cooler F/I Water Inj. Kit (SS Brded Line/4AN Fittings) w/
7.542,94 € excl. VAT

Meth Inject System - SNO-2133-BRD-T

snoSNO-2133-BRD-T
Snow Performance 11-17 F-150 Stg 2 Boost Cooler Water Inj. Kit (SS Brd Line/4AN Fittings) w/o Tank
7.542,94 € excl. VAT

Meth Inject System - SNO-2134-BRD

snoSNO-2134-BRD
Snow Performance 15-17 Mustang EcB Stg 2 Boost Cooler Water Injection Kit (SS Braid Line & 4AN)
7.542,94 € excl. VAT

Meth Inject System - SNO-2134-BRD-T

snoSNO-2134-BRD-T
Snow Performance 15-17 Mustang EcB Stg 2 Bst Cooler Water Injection Kit (SS Brded Line/4AN) w/o Tank
7.542,94 € excl. VAT

Meth Inject System - SNO-2135-BRD

snoSNO-2135-BRD
Snow Performance Stg 2 Boost Cooler 13-18 Ford Focus ST Water Inj Kit (SS Braided Line/4AN Fittings)
7.295,54 € excl. VAT

Meth Inject System - SNO-2135-BRD-T

snoSNO-2135-BRD-T
Snow Performance 13-18 Ford Focus ST Stg 2 Boost Cooler Water Inj Kit (SS Braided Line/4AN) w/o Tank
7.542,94 € excl. VAT

Meth Inject System - SNO-2136-BRD

snoSNO-2136-BRD
Snow Performance Ford EcoBoost 2.0L/2.3L Stage 2.5 Boost Cooler Direct Port Water Injection Kit
10.155,41 € excl. VAT

Meth Inject System - SNO-2160-BRD-T

snoSNO-2160-BRD-T
Snow Performance 10-15 Camaro Stg 2 Bst Cooler F/I Water Injection Kit (SS Brded Line/4AN) w/o Tank
7.542,94 € excl. VAT

Meth Inject System - SNO-2161-BRD-T

snoSNO-2161-BRD-T
Snow Performance 16-17 Camaro Stg 2 Bst Cooler F/I Water Injection Kit (SS Brded Line/4AN) w/o Tank
7.542,94 € excl. VAT

Meth Inject System - SNO-2167-BRD

snoSNO-2167-BRD
Snow Performance 2014+ GM Truck Forced Induction Stage 2 Boost Cooler Water Injection Kit
7.542,94 € excl. VAT

Meth Inject System - SNO-2167-BRD-T

snoSNO-2167-BRD-T
Snow Performance 2014+ GM Truck Stg 2 Bst Cooler F/I Water Inj. Kit (SS Braided Line/4AN) w/o Tank
7.542,94 € excl. VAT

Meth Inject System - SNO-2168-BRD

snoSNO-2168-BRD
Snow Performance Stage 2 Boost Cooler 105mm Hellcat Water-Methanol Injection Kit w/ SS Braided Line
7.542,94 € excl. VAT

Meth Inject System - SNO-2168-BRD-T

snoSNO-2168-BRD-T
Snow Performance Stg 2 Boost Cooler 105mm Hellcat Water Injection Kit (SS Braided Line) w/o Tank
7.542,94 € excl. VAT

Meth Inject System - SNO-2169-BRD

snoSNO-2169-BRD
Snow Performance Stage 2 Boost Cooler N54/N55 Direct Port Water Injection Kit
9.681,90 € excl. VAT

Meth Inject System - SNO-2169-BRD-T

snoSNO-2169-BRD-T
Snow Performance Stage 2 Boost Cooler N54/N55 Direct Port Water Injection Kit w/o Tank
10.155,35 € excl. VAT

Meth Inject System - SNO-2170-BRD-T

snoSNO-2170-BRD-T
Snow Performance 08+ Charger Stg 2 Boost Cooler F/I Water Injection Kit (SS Brded Line/4AN) w/o Tank
7.542,94 € excl. VAT

Meth Inject System - SNO-2171-BRD

snoSNO-2171-BRD
Snow Performance Stg 2 Boost Cooler Challenger/Charger Hellcat Water Inj Kit (SS Braid Line/4AN Fit)
7.285,39 € excl. VAT

Meth Inject System - SNO-2171-BRD-T

snoSNO-2171-BRD-T
Snow Performance Stg 2 Bst Cooler Challenger Hellcat Water Inj Kit (SS Brded Line/4AN Fit) w/o Tank
7.542,94 € excl. VAT

Meth Inject System - SNO-2177-BRD

snoSNO-2177-BRD
Snow Performance Stage 2 Boost Cooler 10-14 Genesis 2.0t Water injection system
7.542,94 € excl. VAT

Meth Inject System - SNO-2177-BRD-T

snoSNO-2177-BRD-T
Snow Performance Stage 2 Boost Cooler 10-14 Genesis 2.0t Water injection system w/o Tank
7.542,94 € excl. VAT

Meth Inject System - SNO-2182-BRD-T

snoSNO-2182-BRD-T
Snow Performance Stage 2 Boost Cooler 2015+ Subaru WRX (Non-STI) Water Injection System w/o Tank
7.542,94 € excl. VAT

Meth Inject System - SNO-2184-BRD

snoSNO-2184-BRD
Snow Performance Stage 2 Boost Cooler 102mm LS Water Injection System
7.542,94 € excl. VAT

Meth Inject System - SNO-2184-BRD-T

snoSNO-2184-BRD-T
Snow Performance Stage 2 Boost Cooler 102mm LS Water Injection System w/o Tank
7.542,94 € excl. VAT