0

Cast Alloy Wheels

Looking for cast aluminium wheels for a project where size and looks need to fit precisely? Here we bring together cast alloy wheels, e.g. Ridler 605 in 18x9.5 with a matte finish and machined surfaces, and help you choose the right dimensions.

Cast wheels vs. flow formed

Cast wheels are made by pouring molten aluminium into a mould, which gives freedom in design and dimensions. On flow formed alloy wheels, the barrel is also rolled under pressure, which typically results in lower weight. You will find both types among our alloy wheels.

How to choose size and fitment

  • Bolt pattern and centre bore: must match your car's hub, e.g. 5x120.65 and 83.82 mm. If the centre bore is larger than the hub, hub centric rings are typically required.
  • Offset: together with the width, determines whether the wheel clears the brakes, suspension and fenders.
  • Diameter and width: e.g. 18x9.5 inches must match the tyre size and the size of the brakes.
  • Finish: Ridler 605 from Ridler Wheels, for example, has a matte cast surface with machined faces.

Whether the wheel and tyre can be approved for inspection depends on the car and the product, so check this for the specific part number. Re-torque the wheel nuts after the first few kilometres.

Frequently asked questions

What is the difference between cast and flow formed alloy wheels?

Both start out as cast aluminium, but on flow formed wheels the barrel is then rolled under pressure. This typically gives a thinner and lighter material, while cast wheels offer great freedom in design. The choice depends on your use and the specific wheel model.

What does 0 mm offset mean on a wheel?

Offset is the distance from the centre of the wheel to the mounting surface. At 0 mm, the mounting surface sits exactly in the middle of the wheel. Whether it fits depends on your car's hub, brakes and fenders, so measure before you buy.

What do I do if the wheel's centre bore is larger than my car's hub?

Then the wheel will not centre on the hub, which can cause vibrations. This is typically solved with hub centric rings of the correct size. If, on the other hand, the centre bore is smaller than the hub, the wheel will not fit.

View as Grid List
Sort by
Display per page