0

Engines & Components

Is your engine stripped down on the bench, or do you just need new valve springs for the cylinder head? In this category we bring together engine parts for projects that demand more than the original parts can handle: pistons, connecting rods, crankshafts, camshafts, bearings, oiling systems and cylinder heads. The parts are aimed at you if you are building for higher boost, more revs or track use.

What the parts in the engine do

An engine consists of systems that have to work together. The rotating assembly – crankshaft, connecting rods and pistons – converts combustion pressure into torque, while the camshaft and valvetrain control when air flows in and out. Bearings and the oiling system keep the moving parts separated by an oil film, and the cylinder head has a major influence on how well the engine breathes. If you increase boost or revs, the load on every part rises, and the weakest link sets the limit. So plan the whole project before you buy individual parts, or take a look at a complete engine kit with rotating assembly.

How to choose pistons and connecting rods

The pistons must match the bore, stroke, rod length and the compression ratio you want. For high-boost engines, lower compression is typically chosen, often via a dish in the piston crown. Also look at the ring pack, wrist pin and any coating. The range includes, for example, Wiseco piston kits and ring sets as well as Manley piston kits for the Chrysler 6.4L Hemi, and JE Pistons and Eagle are also among the brands. The connecting rods must be able to withstand the increased load and have a length that suits the piston and crankshaft – especially in stroker projects where the stroke is changed.

Camshaft and valvetrain must match

A camshaft with more lift and longer duration can move the power band upwards, but the valve springs, retainers and valve locks must be able to keep up. Too little spring pressure can cause valve float at high revs, while unnecessarily high pressure can increase wear on the cam and lifters. So choose based on lift, spring pressure, piston-to-valve clearance and how the engine is used. COMP Cams, for example, offers a beehive spring kit with steel retainers for the Dodge 5.7L Hemi model years 03-08, designed for 0.600 inch lift.

Installation, tolerances and break-in

High-performance engine parts require precise installation. Bearing clearance, piston clearance and ring gap must be measured and adjusted according to the manufacturer's instructions, and the ring gap depends on factors such as bore and application. Check that the parts fit your specific engine and build, including bore, compression height and bearing dimensions. An upgraded oiling system can be relevant at high revs or for track use, where oil pressure can drop in hard corners. After assembly, the engine is typically broken in according to the manufacturer's instructions, and the first oil change is done early to remove wear particles.

Frequently asked questions

Do I need to change pistons if I increase boost?

It depends on the engine, the original pistons and how much the boost is increased. For bigger changes, lower-compression pistons are typically chosen, but the choice should be assessed together with connecting rods, fuel and engine management.

Should the camshaft and valve springs be replaced at the same time?

Often, yes. A camshaft with more lift or a more aggressive profile may require different springs, retainers and valve locks. Check the cam manufacturer's recommended spring pressure and the piston-to-valve clearance before you assemble the engine.

Can I assemble the engine myself with the new parts?

It requires experience, precise measuring tools and the manufacturer's specifications. Bearing clearance, ring gap and torque specs must be checked carefully. If you don't have the equipment, the safest option is to let an engine shop handle the assembly.

Engines & Components
View as Grid List
Sort by
Display per page

Ring Set - 4045MS-112

mhl4045MS-112
Mahle MS 4.040in +.005in 1.0mm 1.0mm 2.0mm File Fit Rings
$183.32 excl. VAT

Ring Set - 4065MS

mhl4065MS
Mahle MS 4.060in+ .005in 1/16in 1/16in 3/16in File Fit Rings
$131.62 excl. VAT

Ring Set - 4125MS-112D

mhl4125MS-112D
Mahle MS 4.125in 1.0mm 1.0mm 2.0mm Drop In Rings
$201.97 excl. VAT

Ring Set - 4310MS

mhl4310MS
Mahle MS 4.310in1/16in 1/16in 3/16in Drop In Rings
$131.62 excl. VAT

Ring Set - 8250MS-10

mhl8250MS-10
Mahle MS 82.50 mm1.0 1.2 2.8mm Drop In Rings
$108.25 excl. VAT

Ring Set - 9200MS-12

mhl9200MS-12
Mahle MS 92.00 mm1.2 1.2 2.8 mm Drop In Rings
$108.31 excl. VAT

Ring Set - 9250MS-12

mhl9250MS-12
Mahle MS 92.50 mm1.2 1.2 2.8 mm Drop In Rings
$108.32 excl. VAT

RING-100mm 1.2mm,1.2mm,2.0mm W/TABS

man461000dt-4
Manley Ring Set Subaru EJ205WRX / EJ257 WRX STi 100mm File Fit 1.2mm x 1.2mm x 2.0mm - Set of 4
$239.81 excl. VAT

RING-3.552 1.5mm,3mm GL TOP

man46600ST-8
Manley Ford 4.6L/5.4L SOHC/DOHC (2 & 4 Valve) Premium Steel Top Rings
$451.46 excl. VAT

RING-3.572 1.5mm,3mm

man46620-8
Manley 97-04 Ford F150 V8 Ring Set
$321.44 excl. VAT

RING-3.572 1.5mm,3mm GL TOP

man46620ST-8
Manley Ford 4.6L & 5.4L Steel Top Ring Set
$451.38 excl. VAT

RING-3.582 1.5mm,3mm

man46630-8
Manley Ford 4.6L/5.4L SOHC/DOHC (2 & 4 Valve) 3.582in Bore Ductile Iron Top Rings (Set of 8)
$321.45 excl. VAT

RING-3.582 1.5mm,3mm GL TOP

man46630ST-8
Manley Ford 4.6L/5.4L (2 & 4 Valve) 3.582in File Fit 1.5 mm x 1.5 mm x 3 mm Std Tension Rings
$451.33 excl. VAT

RING-3.630 1.2mm,3mm STL TOP

man46700ST-8
Manley Ford 5.0L DOHC (4 Valve) 3.630in/3.635in Bore Dome Premium Steel Top Rings
$451.33 excl. VAT

RING-3.635/3.640 1.2mm,3mm STL TOP

man46710ST-8
Manley Ford Coyote 5.0L DOHC 4 Valve 3.635in/3.640in Bore Premium Steel Top Rings
$451.22 excl. VAT

RING-3.642 1.2mm,1.5mm,2.5mm STL TOP

man46642ST-6
Manley Ford 3.5L Ecoboost Ring Set (3.642in. Bore) 1.2mm x 1.2mm x 2.5mm
$435.72 excl. VAT

RING-3.681 1.5mm,3mm STL TOP

man46668ST-8
Manley Ring Set Ford Mustang Shelby GT500 5.8L 3.681in x 1.5mm x 3mm STL Top - Set of 8
$579.29 excl. VAT

RING-3.700 1.2mm,3mm STL TOP

man46771ST-8
Manley Ford 5.0L DOHC (4 Valve) 3.7in Bore Dome Premium Steel Top Rings
$451.23 excl. VAT

RING-4.090 1.2,2.5mm STEEL TOP

man46132ST-8
Manley Chrysler HEMI 6.2L 4.090in Bore File Fit Premium Steel Piston Ring (Set of 8)
$579.35 excl. VAT

RING-4.090 1.5,3mm STEEL TOP

man46129ST-8
Manley Chrysler Ring Set 4.090in 1.5mm 3mm Premium Steel Top Ring
$579.47 excl. VAT

RING-4.100 1.5,3mm STEEL TOP

man46131ST-8
Manley Ring Set Chrysler Hemi 6.4L 4.100in Bore File Fit 1.5mm x 1.5mm x 3mm Premium Steel-Set of 8
$579.42 excl. VAT

RING-4.560 1/16,3/16

man46456-8
Manley 4.560 1/16 3/16 Piston Rings
$176.09 excl. VAT

RING-84mm 1.2mm,1.2mm,2.8mm

man46840-1
Manley 84mm Bore 1.2mm x 1.2mm x 2.8mm Ring Width - Single
$61.48 excl. VAT

RING-85.5mm 1.0mm,1.2mm,2.8mm

man46855-1
Manley 90-99 Mitsubishi 4G63/4G63T Standard Ring (SINGLE RING ONLY)
$69.73 excl. VAT