0

Engines & Components

Is your engine stripped down on the bench, or do you just need new valve springs for the cylinder head? In this category we bring together engine parts for projects that demand more than the original parts can handle: pistons, connecting rods, crankshafts, camshafts, bearings, oiling systems and cylinder heads. The parts are aimed at you if you are building for higher boost, more revs or track use.

What the parts in the engine do

An engine consists of systems that have to work together. The rotating assembly – crankshaft, connecting rods and pistons – converts combustion pressure into torque, while the camshaft and valvetrain control when air flows in and out. Bearings and the oiling system keep the moving parts separated by an oil film, and the cylinder head has a major influence on how well the engine breathes. If you increase boost or revs, the load on every part rises, and the weakest link sets the limit. So plan the whole project before you buy individual parts, or take a look at a complete engine kit with rotating assembly.

How to choose pistons and connecting rods

The pistons must match the bore, stroke, rod length and the compression ratio you want. For high-boost engines, lower compression is typically chosen, often via a dish in the piston crown. Also look at the ring pack, wrist pin and any coating. The range includes, for example, Wiseco piston kits and ring sets as well as Manley piston kits for the Chrysler 6.4L Hemi, and JE Pistons and Eagle are also among the brands. The connecting rods must be able to withstand the increased load and have a length that suits the piston and crankshaft – especially in stroker projects where the stroke is changed.

Camshaft and valvetrain must match

A camshaft with more lift and longer duration can move the power band upwards, but the valve springs, retainers and valve locks must be able to keep up. Too little spring pressure can cause valve float at high revs, while unnecessarily high pressure can increase wear on the cam and lifters. So choose based on lift, spring pressure, piston-to-valve clearance and how the engine is used. COMP Cams, for example, offers a beehive spring kit with steel retainers for the Dodge 5.7L Hemi model years 03-08, designed for 0.600 inch lift.

Installation, tolerances and break-in

High-performance engine parts require precise installation. Bearing clearance, piston clearance and ring gap must be measured and adjusted according to the manufacturer's instructions, and the ring gap depends on factors such as bore and application. Check that the parts fit your specific engine and build, including bore, compression height and bearing dimensions. An upgraded oiling system can be relevant at high revs or for track use, where oil pressure can drop in hard corners. After assembly, the engine is typically broken in according to the manufacturer's instructions, and the first oil change is done early to remove wear particles.

Frequently asked questions

Do I need to change pistons if I increase boost?

It depends on the engine, the original pistons and how much the boost is increased. For bigger changes, lower-compression pistons are typically chosen, but the choice should be assessed together with connecting rods, fuel and engine management.

Should the camshaft and valve springs be replaced at the same time?

Often, yes. A camshaft with more lift or a more aggressive profile may require different springs, retainers and valve locks. Check the cam manufacturer's recommended spring pressure and the piston-to-valve clearance before you assemble the engine.

Can I assemble the engine myself with the new parts?

It requires experience, precise measuring tools and the manufacturer's specifications. Bearing clearance, ring gap and torque specs must be checked carefully. If you don't have the equipment, the safest option is to let an engine shop handle the assembly.

Engines & Components
View as Grid List
Sort by
Display per page

ROD-ACURA 1.8 B18A/B T/T

man14412-4
Manley 90+ Integra LS 1.8 non V-Tec DOHC (B18A/B18B) Turbo Tuff Pro Series I Beam Connecting Rod Set
$1,346.81 excl. VAT

ROD-ACURA 1.8 VTEC H/B

man14026-4
Manley 94+ Integra GSR 1.8 V-Tech DOHC (B18C) H Beam Connecting Rod Set
$707.06 excl. VAT

ROD-ACURA 1.8 VTEC T/T

man14414-1
Manley 94+ Integra GSR 1.8 V-Tech DOHC (B18C)Turbo Tuff Pro Series I Beam Connecting Rod (ONE ROD)
$341.48 excl. VAT

ROD-ACURA 1.8 VTEC T/T

man14414-4
Manley 94+ Integra GSR 1.8 V-Tech DOHC (B18C)Turbo Tuff Pro Series I Beam Connecting Rod Set
$1,346.27 excl. VAT

ROD-ACURA 1.8 VTEC T/T

man14414R6-4
Manley 94+ Integra GSR 1.8 V-Tech DOHC (B18C)Turbo Tuff Pro Series I Beam Connecting Rod Set
$1,492.55 excl. VAT

ROD-BMW N54B30 5.709in T/T

man14448-6
Manley BMW 5.709 T/T N54 Connecting Rod Set
$1,752.72 excl. VAT

ROD-BMW N54B30 TURBO

man14078-1
Manley 06-16 BMW N54B30 5.709in H Beam Connecting Rod - Single
$179.80 excl. VAT

ROD-BMW N55/S55 5.683in T/T

man14449-6
Manley BMW N55/S55 Turbo Tuff Pro Series I Beam Connecting Rods
$1,750.00 excl. VAT

ROD-BMW N55/S55 TURBO

man14079-6
Manley 09+ BMW N55/S55 5.683IN H Beam Connecting Rod Set
$1,061.70 excl. VAT

ROD-DODGE SRT-4 2.4L H/B

man14010-4
Manley Dodge Neon SRT-4 2.4L I4 DOHC H Beam Connecting Rod Set (Set of 4)
$708.37 excl. VAT

ROD-FD 7.3L 7.130 I BEAM

man14161-8
Manley Ford 7.3L Powerstroke 7.128in Center-to-Center Pro Series I Beam Connecting Rods
$3,112.76 excl. VAT

ROD-FORD EcoBoost 2.0 H/B

man14080-1
Manley Ford 2.0L EcoBoost H Beam Connecting Rod w/ .886 inch Wrist Pins ARP 2000 Rod Bolts - Single
$179.75 excl. VAT

ROD-HEMI 5.7,6.1 6.240 STD WEIGHT

man14560-8
Manley Chrysler Hemi 5.7L 1 6.24in Length .9281in Pin Pro Series I Beam Connecting Rod Set
$2,190.55 excl. VAT

ROD-HEMI 5.7/6.1/6.4L 6.125 W/.866 PIN

man15057R-8
Manley Hemi 5.7/6.1/6.4L 6.125 Steel H Tuff Connecting Rods w/ ARP2000 Rod Bolts - Set of 8
$1,233.21 excl. VAT

ROD-HEMI 6.2/6.4L 6.200 W/.927 PIN

man15088R-8
Manley Chrysler 6.2L/6.4L HEMI H Tuff Connecting Rod Set .927in Pin w/ ARP2000 (Set of 8)
$1,418.32 excl. VAT

ROD-HEMI 6.4L 6.200 W/.927 PIN

man14088-8
Manley Chrysler 6.4L Hemi H Beam Connecting Rod Set w/ .927 inch Wrist Pins ARP 8740 Rod Bolts
$1,128.75 excl. VAT

ROD-HONDA 1.6L VTEC B16A H/B

man14012-4
Manley 92+ Honda 1.6L V-Tec DOHC B16A H-Beam Connecting Rod Set
$706.76 excl. VAT

ROD-HONDA 2.2 VTEC T/T

man14417-4
Manley 92+ Honda Prelude 2.2 V-Tec DOHC (H22) Turbo Tuff Pro Series I Beam Connecting Rod Set
$1,347.14 excl. VAT

ROD-HONDA PRELUDE H22 H/B

man14016-4
Manley 92+ Honda Prelude 2.2L V-Tec DOHC H22 H-Beam Connecting Rod Set
$706.43 excl. VAT

ROD-MAZDA 3 MZR 2.3L DISI H/B

man14030-4
Manley Mazda Speed 3 MZR 2.3L DIDSI Turbo H Beam Connecting Rod Set 22mm Pin
$707.58 excl. VAT

ROD-MAZDA 3 MZR 2.3L DISI H/B

man14032-1
Manley Mazda Speed 3 MZR 2.3L DIDSI Turbo 22.5mm Pin H-Beam Connecting Rod *Single Rod*
$179.94 excl. VAT

ROD-MAZDA 3 MZR 2.3L DISI T/T

man14430-4
Manley Mazda Speed 3 MZR 2.3L DISI 5.927 Turbo Tuff Pro Series I Beam Connecting Rod Set
$1,148.84 excl. VAT

ROD-MAZDA 3 MZR 2.3L DISI T/T

man14432-4
Manley Mazda Speed 3 MZR 2.3L DISI T Turbo Tuff Pro Series I Beam Connecting Rod Set
$1,347.16 excl. VAT

ROD-MITSUBISHI ECLIPSE 2.0 H/B

man14020-4
Manley 05/93-99 Mitsubishi Eclipse GST/GSX 03-06 Mitsubishi Evo 8/9 H Beam +6mm Longer Rod Set
$708.24 excl. VAT