0

Engines & Components

Is your engine stripped down on the bench, or do you just need new valve springs for the cylinder head? In this category we bring together engine parts for projects that demand more than the original parts can handle: pistons, connecting rods, crankshafts, camshafts, bearings, oiling systems and cylinder heads. The parts are aimed at you if you are building for higher boost, more revs or track use.

What the parts in the engine do

An engine consists of systems that have to work together. The rotating assembly – crankshaft, connecting rods and pistons – converts combustion pressure into torque, while the camshaft and valvetrain control when air flows in and out. Bearings and the oiling system keep the moving parts separated by an oil film, and the cylinder head has a major influence on how well the engine breathes. If you increase boost or revs, the load on every part rises, and the weakest link sets the limit. So plan the whole project before you buy individual parts, or take a look at a complete engine kit with rotating assembly.

How to choose pistons and connecting rods

The pistons must match the bore, stroke, rod length and the compression ratio you want. For high-boost engines, lower compression is typically chosen, often via a dish in the piston crown. Also look at the ring pack, wrist pin and any coating. The range includes, for example, Wiseco piston kits and ring sets as well as Manley piston kits for the Chrysler 6.4L Hemi, and JE Pistons and Eagle are also among the brands. The connecting rods must be able to withstand the increased load and have a length that suits the piston and crankshaft – especially in stroker projects where the stroke is changed.

Camshaft and valvetrain must match

A camshaft with more lift and longer duration can move the power band upwards, but the valve springs, retainers and valve locks must be able to keep up. Too little spring pressure can cause valve float at high revs, while unnecessarily high pressure can increase wear on the cam and lifters. So choose based on lift, spring pressure, piston-to-valve clearance and how the engine is used. COMP Cams, for example, offers a beehive spring kit with steel retainers for the Dodge 5.7L Hemi model years 03-08, designed for 0.600 inch lift.

Installation, tolerances and break-in

High-performance engine parts require precise installation. Bearing clearance, piston clearance and ring gap must be measured and adjusted according to the manufacturer's instructions, and the ring gap depends on factors such as bore and application. Check that the parts fit your specific engine and build, including bore, compression height and bearing dimensions. An upgraded oiling system can be relevant at high revs or for track use, where oil pressure can drop in hard corners. After assembly, the engine is typically broken in according to the manufacturer's instructions, and the first oil change is done early to remove wear particles.

Frequently asked questions

Do I need to change pistons if I increase boost?

It depends on the engine, the original pistons and how much the boost is increased. For bigger changes, lower-compression pistons are typically chosen, but the choice should be assessed together with connecting rods, fuel and engine management.

Should the camshaft and valve springs be replaced at the same time?

Often, yes. A camshaft with more lift or a more aggressive profile may require different springs, retainers and valve locks. Check the cam manufacturer's recommended spring pressure and the piston-to-valve clearance before you assemble the engine.

Can I assemble the engine myself with the new parts?

It requires experience, precise measuring tools and the manufacturer's specifications. Bearing clearance, ring gap and torque specs must be checked carefully. If you don't have the equipment, the safest option is to let an engine shop handle the assembly.

Engines & Components
View as Grid List
Sort by
Display per page

RING-85.5mm 1.0mm,1.2mm,2.8mm

man46855-4
Manley 90-99 Mitsubishi 4G63/4G63T Standard Ring Set
$239.68 excl. VAT

RING-85mm 1.0mm,1.2mm,2.8mm

man46850-4
Manley Sport Compact 85.0mm Bore Drop In 1.2mm x 1.2mm x 2.8mm Standard Ring Set
$239.56 excl. VAT

RING-86mm 1.2mm,1.2mm,2.8mm

man46860-4
Manley 02+ Acura RSX K20A-A2-A3 DOHC V-Tech / Mitsubishi (Various apps) Ring Set
$239.61 excl. VAT

RING-86mm 1.2mm,1.5mm,3.0mm W/TABS

man46861DT-4
Manley Ring Set 13+ Subaru BRZ / 15+ Subaru WRX (FA20) 86mm Bore 1.2mm 1.5mm 3.0mm (Set of 4)
$239.83 excl. VAT

RING-87.5mm 1.2mm,1.2mm,2.8mm

man46875-4
Manley 87.5mm File Fit 1.2mm x1.2mmx2.8mm Standard (7-11lbs) Ring Set
$223.18 excl. VAT

RING-87mm 1.2mm,1.2mm,2.8mm

man46870-4
Manley 02+ Honda CRV K24A w/ K20A/A2/A3 Head DOHC V-Tec 87mm Ring Set
$239.75 excl. VAT

RING-88mm 1.2mm,1.2mm,2.8mm

man46880-4
Manley Ring Set MazdaSpeed 3 Piston 88mm bore (Set of 4)
$223.14 excl. VAT

RING-92.5mm 1.2mm,1.2mm,2.8mm W/TABS

man46925DT-4
Manley Ring Set EJ205 WRX / EJ257 WRX STi 92.5mm Bore File Fit - 1.2mm / 1.2mm / 2.8mm - Set of 4
$253.07 excl. VAT

RING-93.0mm 1.2mm,1.2mm,2.8mm

man46930-4
Manley 98+ Subaru WRX EJ205 93.0mm Bore +1.0mm Oversize Bore 1.2mmx1.2mmx2.8mm Ring Set
$216.85 excl. VAT

RING-99.5mm 1.2mm,1.2mm,2.0mm W/TABS

man46995DT-4
Manley 2004+ Subaru WRX STI 99.50mm STD Bore 1.2mm Double Tabbed Rings - Set of Four
$239.75 excl. VAT

RING-99.5mm 1.2mm,1.2mm,2.0mm W/TABS

man46995DT-1
Manley 2004+ Subaru WRX STI 99.50mm STD Bore 1.2mm Double Tabbed Ring Pack
$69.72 excl. VAT

RING-99.75mm 1.2mm,1.2mm,2.0mm

man46997-4
Manley 04+ Subaru WRX/STi (EJ257) 99.75mm Bore 1.2mm x 1.2mm x 2.0mm +.25mm Oversized Ring Set
$239.82 excl. VAT

Rocker Arm Kit - M-6529-3V

frpM-6529-3V
Ford Racing Modular 3V Rocker Arm and Lash Adjuster Kit
$753.20 excl. VAT

Rocker Arm Kit - M-6529-MSVT

frpM-6529-MSVT
Ford Racing Mustang SVT 5.4L Modular Rocker Arm Set
$467.87 excl. VAT

Rocker Arm Kit - M-6564-M52A

frpM-6564-M52A
Ford Racing 2020 5.2L Predator Roller Finger Follower Kit
$809.72 excl. VAT

ROD-14051 W/ARP 2000

man14051R-1
Manley Chevy Small Block LS-1 6.125in H Beam w/ ARP 2000 Connecting Rod *Single
$161.43 excl. VAT

ROD-14051 W/ARP 2000

man14051R-8
Manley Chevy Small Block LS-1 6.125in H Beam w/ ARP 2000 Connecting Rod Set
$1,273.53 excl. VAT

ROD-300M MITSUBISHI ECLIPSE 2.0

man15403-1
Manley 1993.5-99 Mitsubishi Eclipse GST/GSX 2.0 Pro Series 300M TTuff I Beam Rod - SINGLE
$471.43 excl. VAT

ROD-4.6L/5.0L 300M 5.933 LIGHTWEIGHT

man15318-8
Manley Ford 5.0L V8 Coyote 5.933in Length Pro Series I Beam Connecting Rod Set
$3,929.73 excl. VAT

ROD-4.6L/5.0L 5.933 H BEAM

man14042-1
Manley Ford Modular V8-4.6L H Beam Connecting (Single Rod)
$157.86 excl. VAT

ROD-ACURA 1.8 B18A/B H/B

man14025-1
Manley 90+ Integra LS 1.8 non V-Tech DOHC (B18A/B18B) H Beam Single Connecting Rod
$179.66 excl. VAT

ROD-ACURA 1.8 B18A/B H/B

man14025-4
Manley 90+ Integra LS 1.8 non V-Tech DOHC (B18A/B18B) H Beam Connecting Rod Set
$706.80 excl. VAT