0

Engines & Components

Is your engine stripped down on the bench, or do you just need new valve springs for the cylinder head? In this category we bring together engine parts for projects that demand more than the original parts can handle: pistons, connecting rods, crankshafts, camshafts, bearings, oiling systems and cylinder heads. The parts are aimed at you if you are building for higher boost, more revs or track use.

What the parts in the engine do

An engine consists of systems that have to work together. The rotating assembly – crankshaft, connecting rods and pistons – converts combustion pressure into torque, while the camshaft and valvetrain control when air flows in and out. Bearings and the oiling system keep the moving parts separated by an oil film, and the cylinder head has a major influence on how well the engine breathes. If you increase boost or revs, the load on every part rises, and the weakest link sets the limit. So plan the whole project before you buy individual parts, or take a look at a complete engine kit with rotating assembly.

How to choose pistons and connecting rods

The pistons must match the bore, stroke, rod length and the compression ratio you want. For high-boost engines, lower compression is typically chosen, often via a dish in the piston crown. Also look at the ring pack, wrist pin and any coating. The range includes, for example, Wiseco piston kits and ring sets as well as Manley piston kits for the Chrysler 6.4L Hemi, and JE Pistons and Eagle are also among the brands. The connecting rods must be able to withstand the increased load and have a length that suits the piston and crankshaft – especially in stroker projects where the stroke is changed.

Camshaft and valvetrain must match

A camshaft with more lift and longer duration can move the power band upwards, but the valve springs, retainers and valve locks must be able to keep up. Too little spring pressure can cause valve float at high revs, while unnecessarily high pressure can increase wear on the cam and lifters. So choose based on lift, spring pressure, piston-to-valve clearance and how the engine is used. COMP Cams, for example, offers a beehive spring kit with steel retainers for the Dodge 5.7L Hemi model years 03-08, designed for 0.600 inch lift.

Installation, tolerances and break-in

High-performance engine parts require precise installation. Bearing clearance, piston clearance and ring gap must be measured and adjusted according to the manufacturer's instructions, and the ring gap depends on factors such as bore and application. Check that the parts fit your specific engine and build, including bore, compression height and bearing dimensions. An upgraded oiling system can be relevant at high revs or for track use, where oil pressure can drop in hard corners. After assembly, the engine is typically broken in according to the manufacturer's instructions, and the first oil change is done early to remove wear particles.

Frequently asked questions

Do I need to change pistons if I increase boost?

It depends on the engine, the original pistons and how much the boost is increased. For bigger changes, lower-compression pistons are typically chosen, but the choice should be assessed together with connecting rods, fuel and engine management.

Should the camshaft and valve springs be replaced at the same time?

Often, yes. A camshaft with more lift or a more aggressive profile may require different springs, retainers and valve locks. Check the cam manufacturer's recommended spring pressure and the piston-to-valve clearance before you assemble the engine.

Can I assemble the engine myself with the new parts?

It requires experience, precise measuring tools and the manufacturer's specifications. Bearing clearance, ring gap and torque specs must be checked carefully. If you don't have the equipment, the safest option is to let an engine shop handle the assembly.

Engines & Components
View as Grid List
Sort by
Display per page

Valve-R/M 2.300,+.100

man11728-8
Manley Chevrolet Big Block Intake Valve Kit - 2.300in Head Dia. 5.344in O/A Length, 0.3715in Stem
$269.10 excl. VAT

Valve-R/M 2.300,+.100

man11816-8
Manley Chevrolet Big Block Intake Valve Kit - 2.300in Head Dia. 5.344in O/A Length, 0.3415in Stem
$269.10 excl. VAT

Valve-R/M 2.300,+.250

man11870-8
Manley Big Block Chevy 2.300 Dia .250in Longer Race Master Intake Valves (Set of 8)
$269.10 excl. VAT

Valve-R/M 300 ZX 29.5mm

man11105-1
Manley 90-96 Nissan 300ZX 3.0L (VG30D-VG30DTT) 29.5mm Stainless Race Master Exhaust Valve - Single
$43.10 excl. VAT

Valve-R/M 300 ZX 29.5mm

man11105-12
Manley 90-96 Nissan 300ZX 3.0L (VG30D - VG30DTT) DOHC 24 Exhaust 29.5mm Stainless Race Master Valves
$409.50 excl. VAT

Valve-R/M 300 ZX 30.5mm

man11107-12
Manley 90-96 Nissan 300ZX 3.0L (VG30D - VG30DTT) DOHC 24 Exhaust 30.5mm Stainless Race Master Valves
$417.22 excl. VAT

Valve-R/M 300 ZX 34mm

man11106-12
Manley 90-96 Nissan 300ZX 3.0L (VG30D - VG30DTT) DOHC 24 Intake 34mm Stainless Race Flo Valves
$409.91 excl. VAT

Valve-R/M 300 ZX 35mm

man11108-12
Manley 90-96 Nissan 300ZX 3.0L (VG30D - VG30DTT) DOHC 24 Intake 35mm Stainless Race Flo Valves
$417.22 excl. VAT

Valve-R/M 3S-GTE 29mm

man11115-8
Manley 90-95 Toyota MR2 2.0L DOHC 16 Valve (Turbo 3SGTE) 29mm Stainless Race Master Exhaust Valves
$281.58 excl. VAT

Valve-R/M 3S-GTE 29mm

man11115-1
Manley 90-95 Toyota MR2 2.0L (Turbo 3SGTE) 29mm Race Master Exhaust Valve (Single Valve)
$46.02 excl. VAT

Valve-R/M 3S-GTE 30mm

man11117-8
Manley Toyota MR2 2.0L DOHC Turbo 16 Valve 30MM Race Flo Exhaust Valves
$281.58 excl. VAT

Valve-R/M 3S-GTE 33.5mm

man11116-8
Manley 90-95 Toyota MR2 2.0L DOHC 16 Valve (Turbo 3SGTE) 33.5mm Stainless Race Flo Intake Valves
$281.58 excl. VAT

Valve-R/M 3S-GTE 34.5mm

man11118-8
Manley Toyota MR2 2.0L DOHC Turbo 16 Valve 34.5MM Race Flo Intake Valves
$281.58 excl. VAT

Valve-R/M 4A-GE 27.5mm

man11113-8
Manley Toyota 4AG Atlantic Exhaust Valve Kit - 27.50mm Head Dia. 99.75mm O/A Length, 0.2362in Stem
$281.58 excl. VAT

Valve-R/M 4A-GE 32mm

man11114-8
Manley Toyota 4AG Atlantic Intake Valve Kit - 32.00mm Head Dia. 99.60mm O/A Length, 0.2362in Stem
$281.58 excl. VAT

Valve-R/M BRODIX SR20? 1.800, 5.930

man12341-8
Manley Chevrolet Big Block Exhaust Valve Kit - 1.800in Head Dia. 5.930in O/A Length, 0.3415in Stem
$266.83 excl. VAT

Valve-R/M HONDA 25mm

man11383-8
Manley 88-91 Honda Civic CRX SI 1.6L SOHC 16 Valve (DA16A6) 25mm Pro Flo Exhaust Valves (Set of 8)
$281.58 excl. VAT

Valve-R/M HONDA 26mm

man11367-8
Manley Honda 1.6L D16Y5 Exhaust Valve Kit - 26.00mm Head Dia. 115.95mm O/A Length, 0.2150in Stem
$281.58 excl. VAT

Valve-R/M HONDA 26mm

man11385-8
Manley 88-91 Honda Civic CRX SI 1.6L SOHC 16 Valve (DA16A6) 26mm Race Flo Exhaust Valves (Set of 8)
$281.58 excl. VAT

Valve-R/M HONDA 27mm

man11369-8
Manley 92-00 Honda Civic 1.6L SOHC 16 Valve 27mm Race Flo Exhaust Valve
$281.58 excl. VAT

Valve-R/M HONDA 28.5mm

man11693-8
Manley Acura 1.6L B16A1 Exhaust Valve Kit - 28.50mm Head Dia. 102.70mm O/A Length, 0.2150in Stem
$282.27 excl. VAT

Valve-R/M HONDA 28.5mm

man11375-8
Manley Acura/Honda (B16A1/B16A3/B17A1/B18C1-C3) 28.5mm RaceMaster Exhaust Valve (Set of 8)
$281.58 excl. VAT

Valve-R/M HONDA 28mm

man11373-8
Manley 92-00 Acura Integra / 99-00 Honda Civic 16 Valve 28.0mm Race Flo Exhaust Valve (Set of 8)
$281.58 excl. VAT

Valve-R/M HONDA 28mm

man11691-8
Manley 92-00 Acura Integra / 99-00 Honda Civic 16 Valve 28.0mm Race Flo F/F Exh Valves (Set of 8)
$282.27 excl. VAT