0

Engines & Components

Is your engine stripped down on the bench, or do you just need new valve springs for the cylinder head? In this category we bring together engine parts for projects that demand more than the original parts can handle: pistons, connecting rods, crankshafts, camshafts, bearings, oiling systems and cylinder heads. The parts are aimed at you if you are building for higher boost, more revs or track use.

What the parts in the engine do

An engine consists of systems that have to work together. The rotating assembly – crankshaft, connecting rods and pistons – converts combustion pressure into torque, while the camshaft and valvetrain control when air flows in and out. Bearings and the oiling system keep the moving parts separated by an oil film, and the cylinder head has a major influence on how well the engine breathes. If you increase boost or revs, the load on every part rises, and the weakest link sets the limit. So plan the whole project before you buy individual parts, or take a look at a complete engine kit with rotating assembly.

How to choose pistons and connecting rods

The pistons must match the bore, stroke, rod length and the compression ratio you want. For high-boost engines, lower compression is typically chosen, often via a dish in the piston crown. Also look at the ring pack, wrist pin and any coating. The range includes, for example, Wiseco piston kits and ring sets as well as Manley piston kits for the Chrysler 6.4L Hemi, and JE Pistons and Eagle are also among the brands. The connecting rods must be able to withstand the increased load and have a length that suits the piston and crankshaft – especially in stroker projects where the stroke is changed.

Camshaft and valvetrain must match

A camshaft with more lift and longer duration can move the power band upwards, but the valve springs, retainers and valve locks must be able to keep up. Too little spring pressure can cause valve float at high revs, while unnecessarily high pressure can increase wear on the cam and lifters. So choose based on lift, spring pressure, piston-to-valve clearance and how the engine is used. COMP Cams, for example, offers a beehive spring kit with steel retainers for the Dodge 5.7L Hemi model years 03-08, designed for 0.600 inch lift.

Installation, tolerances and break-in

High-performance engine parts require precise installation. Bearing clearance, piston clearance and ring gap must be measured and adjusted according to the manufacturer's instructions, and the ring gap depends on factors such as bore and application. Check that the parts fit your specific engine and build, including bore, compression height and bearing dimensions. An upgraded oiling system can be relevant at high revs or for track use, where oil pressure can drop in hard corners. After assembly, the engine is typically broken in according to the manufacturer's instructions, and the first oil change is done early to remove wear particles.

Frequently asked questions

Do I need to change pistons if I increase boost?

It depends on the engine, the original pistons and how much the boost is increased. For bigger changes, lower-compression pistons are typically chosen, but the choice should be assessed together with connecting rods, fuel and engine management.

Should the camshaft and valve springs be replaced at the same time?

Often, yes. A camshaft with more lift or a more aggressive profile may require different springs, retainers and valve locks. Check the cam manufacturer's recommended spring pressure and the piston-to-valve clearance before you assemble the engine.

Can I assemble the engine myself with the new parts?

It requires experience, precise measuring tools and the manufacturer's specifications. Bearing clearance, ring gap and torque specs must be checked carefully. If you don't have the equipment, the safest option is to let an engine shop handle the assembly.

Engines & Components
View as Grid List
Sort by
Display per page

Valve-R/M HONDA 28mm

man11373-1
Manley 92-00 Acura Integra / 99-00 Honda Civic 16 Valve 28.0mm Race Flo Exhaust Valve (Single Valve)
$43.10 excl. VAT

Valve-R/M HONDA 28mm

man11691-1
Manley 92-00 Acura Integra / 99-00 Honda Civic 16 Valve 28.0mm Race Flo Flat Face Exh Valve (SINGLE)
$43.22 excl. VAT

Valve-R/M HONDA 29mm

man11384-8
Manley 88-91 Honda Civic CRX SI 1.6L SOHC 16 Valve (DA16A6) 29mm Pro Flo Intake Valves (Set of 8)
$281.58 excl. VAT

Valve-R/M HONDA 29mm

man11377-1
Manley 92-00 Acura Integra / 99-00 Honda Civic 16 Valve 29mm RaceMaster Exhaust Valve (Single Valve)
$43.10 excl. VAT

Valve-R/M HONDA 29mm

man11371-8
Manley Honda 2.2L F22B1 Exhaust Valve Kit - 29.00mm Head Dia. 114.25mm O/A Length, 0.2150in Stem
$281.58 excl. VAT

Valve-R/M HONDA 29mm

man11377-8
Manley 92-00 Acura Integra / 99-00 Honda Civic 16 Valve 29mm RaceMaster Exhaust Valve (Set of 8)
$273.16 excl. VAT

Valve-R/M HONDA 30.5mm

man11339-8
Manley 93-00 Honda Prelude 2.2L DOHC V-TEC 16 Valve 30.5mm Race Flo Exhaust Va
$281.58 excl. VAT

Valve-R/M HONDA 30.5mm

man11129-8
Manley Acura 2.0L K20A2 Exhaust Valve Kit - 30.50mm Head Dia. 109.04mm O/A Length, 0.2150in Stem
$281.58 excl. VAT

Valve-R/M HONDA 30mm

man11379-8
Manley 94-97 Honda Accord 2.2L SOHC V-Tec 16 Valve 30.0mm Race Flo Exhaust Valve (Set of 8)
$281.58 excl. VAT

Valve-R/M HONDA 30mm

man11386-8
Manley 88-91 Honda Civic CRX SI 1.6L SOHC 16 Valve (DA16A6) 30mm Race Flo Intake Valves (Set of 8)
$281.58 excl. VAT

Valve-R/M HONDA 30mm

man11379-1
Manley 94-97 Honda Accord 2.2L SOHC V-Tec 16 Valve 30.0mm Race Flo Exhaust Valve (Single)
$42.61 excl. VAT

Valve-R/M HONDA 30mm

man11127-1
Manley 01+ Acura RSX Type S (K20A2) 30.0mm Race Master Exhaust Valves - Single
$42.66 excl. VAT

Valve-R/M HONDA 30mm

man11393-8
Manley 93-00 Honda Prelude DOHC V-TEC 16 Valve 30.0mm Race Master Exhaust Valves (Set of 8)
$281.58 excl. VAT

Valve-R/M HONDA 30mm

man11366-8
Manley Honda 1.6L D16Y5 intake Valve Kit - 30.00mm Head Dia. 118.60mm O/A Length, 0.2157in Stem
$281.58 excl. VAT

Valve-R/M HONDA 30mm

man11127-8
Manley 01+ Acura RSX Type S 2.0L DOHC i-VTEC 16 Valve (K20A2) 30.0mm Race Master Exhaust Valves
$281.58 excl. VAT

Valve-R/M HONDA 31mm

man11368-8
Manley 92-00 Honda Civic 1.6L SOHC 16 Valve 31mm Race Flo Exhaust Valve
$281.58 excl. VAT

Valve-R/M HONDA 31mm

man11131-8
Manley Acura 2.0L K20A2 Exhaust Valve Kit - 31.00mm Head Dia. 109.04mm O/A Length, 0.2150in Stem
$281.58 excl. VAT

Valve-R/M HONDA 31mm

man11395-8
Manley Honda 2.2L H22A1 Exhaust Valve Kit - 31.00mm Head Dia. 106.90mm O/A Length, 0.2150in Stem
$281.58 excl. VAT

Valve-R/M HONDA 33.5mm

man11692-8
Manley Acura 1.6L B16A1 intake Valve Kit - 33.50mm Head Dia. 102.40mm O/A Length, 0.2157in Stem
$282.27 excl. VAT

Valve-R/M HONDA 33.5mm

man11374-8
Manley 92-00 Acura Integra / 99-00 Honda Civic 16 Valve 33.5mm Race Flo Intake Valves (Set of 8)
$281.58 excl. VAT

Valve-R/M HONDA 33mm

man11372-1
Manley 92-00 Acura Integra / 99-00 Honda Civic 16 Valve 33.0mm Race Flo Intake Valve (Single Valve)
$43.10 excl. VAT

Valve-R/M HONDA 33mm

man11372-8
Manley 92-00 Acura Integra / 99-00 Honda Civic 16 Valve 33.0mm Race Flo Intake Valve (Set of 8)
$281.58 excl. VAT

Valve-R/M HONDA 33mm

man11690-8
Manley 92-00 Acura Integra / 99-00 Honda Civic 16 Valve 33.0mm Race Flo F/F Intake Valves (Set of 8)
$282.27 excl. VAT

Valve-R/M HONDA 33mm

man11690-1
Manley 92-00 Acura Integra / 99-00 Honda Civic 16 Valve 33.0mm Race Flo F/F Intake Valve (SINGLE)
$43.22 excl. VAT