0

Engines & Components

Is your engine stripped down on the bench, or do you just need new valve springs for the cylinder head? In this category we bring together engine parts for projects that demand more than the original parts can handle: pistons, connecting rods, crankshafts, camshafts, bearings, oiling systems and cylinder heads. The parts are aimed at you if you are building for higher boost, more revs or track use.

What the parts in the engine do

An engine consists of systems that have to work together. The rotating assembly – crankshaft, connecting rods and pistons – converts combustion pressure into torque, while the camshaft and valvetrain control when air flows in and out. Bearings and the oiling system keep the moving parts separated by an oil film, and the cylinder head has a major influence on how well the engine breathes. If you increase boost or revs, the load on every part rises, and the weakest link sets the limit. So plan the whole project before you buy individual parts, or take a look at a complete engine kit with rotating assembly.

How to choose pistons and connecting rods

The pistons must match the bore, stroke, rod length and the compression ratio you want. For high-boost engines, lower compression is typically chosen, often via a dish in the piston crown. Also look at the ring pack, wrist pin and any coating. The range includes, for example, Wiseco piston kits and ring sets as well as Manley piston kits for the Chrysler 6.4L Hemi, and JE Pistons and Eagle are also among the brands. The connecting rods must be able to withstand the increased load and have a length that suits the piston and crankshaft – especially in stroker projects where the stroke is changed.

Camshaft and valvetrain must match

A camshaft with more lift and longer duration can move the power band upwards, but the valve springs, retainers and valve locks must be able to keep up. Too little spring pressure can cause valve float at high revs, while unnecessarily high pressure can increase wear on the cam and lifters. So choose based on lift, spring pressure, piston-to-valve clearance and how the engine is used. COMP Cams, for example, offers a beehive spring kit with steel retainers for the Dodge 5.7L Hemi model years 03-08, designed for 0.600 inch lift.

Installation, tolerances and break-in

High-performance engine parts require precise installation. Bearing clearance, piston clearance and ring gap must be measured and adjusted according to the manufacturer's instructions, and the ring gap depends on factors such as bore and application. Check that the parts fit your specific engine and build, including bore, compression height and bearing dimensions. An upgraded oiling system can be relevant at high revs or for track use, where oil pressure can drop in hard corners. After assembly, the engine is typically broken in according to the manufacturer's instructions, and the first oil change is done early to remove wear particles.

Frequently asked questions

Do I need to change pistons if I increase boost?

It depends on the engine, the original pistons and how much the boost is increased. For bigger changes, lower-compression pistons are typically chosen, but the choice should be assessed together with connecting rods, fuel and engine management.

Should the camshaft and valve springs be replaced at the same time?

Often, yes. A camshaft with more lift or a more aggressive profile may require different springs, retainers and valve locks. Check the cam manufacturer's recommended spring pressure and the piston-to-valve clearance before you assemble the engine.

Can I assemble the engine myself with the new parts?

It requires experience, precise measuring tools and the manufacturer's specifications. Bearing clearance, ring gap and torque specs must be checked carefully. If you don't have the equipment, the safest option is to let an engine shop handle the assembly.

Engines & Components
View as Grid List
Sort by
Display per page

Valve-R/M HONDA 34mm

man11370-8
Manley Honda 2.2L F22B1 intake Valve Kit - 34.00mm Head Dia. 116.00mm O/A Length, 0.2157in Stem
$281.58 excl. VAT

Valve-R/M HONDA 34mm

man11376-8
Manley Acura 1.6L B16A1 intake Valve Kit - 34.00mm Head Dia. 102.40mm O/A Length, 0.2157in Stem
$281.58 excl. VAT

Valve-R/M HONDA 35.5mm

man11130-8
Manley Acura 2.0L K20A2 intake Valve Kit - 35.50mm Head Dia. 109.22mm O/A Length, 0.2157in Stem
$281.58 excl. VAT

Valve-R/M HONDA 35.5mm

man11338-8
Manley 93-00 Honda Prelude 2.2L DOHC V-TEC 16 Valve 35.5mm Race Flo Intake Va
$281.58 excl. VAT

Valve-R/M HONDA 35mm

man11394-8
Manley 93-00 Honda Prelude DOHC V-TEC 16 Valve 35.0mm Race Flo Exhaust Valves (Set of 8)
$281.58 excl. VAT

Valve-R/M HONDA 35mm

man11128-8
Manley 01+ Acura RSX Type S 2.0L DOHC i-VTEC 16 Valve (K20A2) 35.0mm Race Master Intake Valves
$281.58 excl. VAT

Valve-R/M HONDA 35mm

man11378-8
Manley 94-97 Honda Accord 2.2L SOHC V-TEC 16 Valve (F22B1) 35mm Pro Flo Intake Valves (Set of 8)
$281.58 excl. VAT

Valve-R/M HONDA 35mm

man11378-1
Manley 94-97 Honda Accord 2.2L SOHC V-TEC 16 Valve (F22B1) 35mm Pro Flo Intake Valve (Single Valve)
$43.10 excl. VAT

Valve-R/M HONDA 36mm

man11132-8
Manley 01+ Acura RSX Type S 2.0L DOHC i-VTEC 16 Valve (K20A2) 36mm Intake Stainless Race Flo Valves
$281.58 excl. VAT

Valve-R/M HONDA 36mm

man11396-8
Manley Honda 2.2L H22A1 intake Valve Kit - 36.00mm Head Dia. 106.65mm O/A Length, 0.2157in Stem
$281.58 excl. VAT

Valve-R/M HONDA 36mm

man11132-1
Manley 01+ Acura RSX Type S 2.0L DOHC i-VTEC (K20A2) 36mm Intake Stainless Race Flo Valve - SINGLE
$43.10 excl. VAT

Valve-R/M L83 5.3L 1.560, .3136 STEM

man12359-8
Manley Chevrolet 5.3L L83 Exhaust Valve Kit - 1.560in Head Dia. 5.208in O/A Length, 0.3136in Stem
$266.83 excl. VAT

Valve-R/M LT1 6.2L 1.590, .3136 STEM

man12345-1
Manley Chevrolet LT1 6.2L 1.590in Head Diameter Race Master Exhaust Valve - Single
$42.15 excl. VAT

Valve-R/M MIATA 28mm

man11101-1
Manley 90-99 Mazda Miata 1.8L (BP056) DOHC 16 Exhaust 28mm Stainless Race Master - Single Valve
$44.79 excl. VAT

Valve-R/M MIATA 29mm

man11103-8
Manley 90-99 Mazda Miata 1.8L (BP056) DOHC 16 Exhaust 29mm Stainless Race Master Valves
$273.37 excl. VAT

Valve-R/M MIATA 33mm

man11102-1
Manley 90-99 Mazda Miata 1.8L (BP056) DOHC 16 Intake 33mm Stainless Race Master Valve - Single
$42.46 excl. VAT

Valve-R/M MIATA 34mm

man11104-8
Manley 90-99 Mazda Miata 1.8L (BP056) DOHC 16 Intake 34mm Stainless Race Master Valves
$274.03 excl. VAT

Valve-R/M MITSUBISHI 30.5mm

man11133-8
Manley 90-00 Mitsubishi Eclipse GS GST 2.0L (4G63-4G63T) DOHC 16 Exhaust 30.5mm Stainless Race Flo
$281.58 excl. VAT

Valve-R/M MITSUBISHI 30.5mm

man11133-1
Manley 90-00 Mitsubishi Eclipse GS GST 2.0L Exhaust 30.5mm Stainless Race Flo Valve *Single Valve*
$43.10 excl. VAT

Valve-R/M MITSUBISHI 31.5mm

man11135-1
Manley 90-00 Mitsubishi Eclipse GS GST 2.0L (4G63-4G63T) DOHC 16 Exhaust 31.5mm Stainless Race Flo
$43.10 excl. VAT

Valve-R/M MITSUBISHI 31.5mm

man11135-8
Manley 90-00 Mitsubishi Eclipse GS GST 2.0L (4G63-4G63T) DOHC 16 Exhaust 31.5mm Stainless Race Flo
$281.58 excl. VAT

Valve-R/M MITSUBISHI 31mm

man11161-8
Manley 90-00 Mitsubishi Eclipse GS GST 2.0L (4G634G63T) DOHC 16 Exhaust 31mm Stainless Race Flo Va
$281.58 excl. VAT

Valve-R/M MITSUBISHI 31mm

man11161-1
Manley 90-00 Mitsubishi Eclipse 2.0L (4G63 4G63T) Exhaust 31mm Stainless Race Flo Valve (Single)
$43.10 excl. VAT

Valve-R/M MITSUBISHI 34.5mm

man11160-1
Manley 90-00 Mitsubishi Eclipse 2.0L (4G63 4G63T) Intake 34.5mm Stainless Race Flo Valve (Single)
$43.10 excl. VAT