0

Engines & Components

Is your engine stripped down on the bench, or do you just need new valve springs for the cylinder head? In this category we bring together engine parts for projects that demand more than the original parts can handle: pistons, connecting rods, crankshafts, camshafts, bearings, oiling systems and cylinder heads. The parts are aimed at you if you are building for higher boost, more revs or track use.

What the parts in the engine do

An engine consists of systems that have to work together. The rotating assembly – crankshaft, connecting rods and pistons – converts combustion pressure into torque, while the camshaft and valvetrain control when air flows in and out. Bearings and the oiling system keep the moving parts separated by an oil film, and the cylinder head has a major influence on how well the engine breathes. If you increase boost or revs, the load on every part rises, and the weakest link sets the limit. So plan the whole project before you buy individual parts, or take a look at a complete engine kit with rotating assembly.

How to choose pistons and connecting rods

The pistons must match the bore, stroke, rod length and the compression ratio you want. For high-boost engines, lower compression is typically chosen, often via a dish in the piston crown. Also look at the ring pack, wrist pin and any coating. The range includes, for example, Wiseco piston kits and ring sets as well as Manley piston kits for the Chrysler 6.4L Hemi, and JE Pistons and Eagle are also among the brands. The connecting rods must be able to withstand the increased load and have a length that suits the piston and crankshaft – especially in stroker projects where the stroke is changed.

Camshaft and valvetrain must match

A camshaft with more lift and longer duration can move the power band upwards, but the valve springs, retainers and valve locks must be able to keep up. Too little spring pressure can cause valve float at high revs, while unnecessarily high pressure can increase wear on the cam and lifters. So choose based on lift, spring pressure, piston-to-valve clearance and how the engine is used. COMP Cams, for example, offers a beehive spring kit with steel retainers for the Dodge 5.7L Hemi model years 03-08, designed for 0.600 inch lift.

Installation, tolerances and break-in

High-performance engine parts require precise installation. Bearing clearance, piston clearance and ring gap must be measured and adjusted according to the manufacturer's instructions, and the ring gap depends on factors such as bore and application. Check that the parts fit your specific engine and build, including bore, compression height and bearing dimensions. An upgraded oiling system can be relevant at high revs or for track use, where oil pressure can drop in hard corners. After assembly, the engine is typically broken in according to the manufacturer's instructions, and the first oil change is done early to remove wear particles.

Frequently asked questions

Do I need to change pistons if I increase boost?

It depends on the engine, the original pistons and how much the boost is increased. For bigger changes, lower-compression pistons are typically chosen, but the choice should be assessed together with connecting rods, fuel and engine management.

Should the camshaft and valve springs be replaced at the same time?

Often, yes. A camshaft with more lift or a more aggressive profile may require different springs, retainers and valve locks. Check the cam manufacturer's recommended spring pressure and the piston-to-valve clearance before you assemble the engine.

Can I assemble the engine myself with the new parts?

It requires experience, precise measuring tools and the manufacturer's specifications. Bearing clearance, ring gap and torque specs must be checked carefully. If you don't have the equipment, the safest option is to let an engine shop handle the assembly.

Engines & Components
View as Grid List
Sort by
Display per page

Valve-R/M MITSUBISHI 34.5mm

man11160-8
Manley 90-00 Mitsubishi Eclipse GS GST 2.0L (4G634G63T) DOHC 16 Intake 34.5mm Stainless Race Flo V
$281.58 excl. VAT

Valve-R/M MITSUBISHI 34mm

man11134-8
Manley 90-00 Mitsubishi Eclipse GS GST 2.0L (4G63-4G63T) DOHC 16 Intake 34mm Stainless Race Flo Val
$281.58 excl. VAT

Valve-R/M MITSUBISHI 34mm

man11134-1
Manley 90-00 Mitsubishi Eclipse GS/T 2.0L (4G63/T) DOHC 16 Intake 34mm Stainless Race Flo Valve
$43.10 excl. VAT

Valve-R/M MITSUBISHI 35mm

man11136-8
Manley 90-00 Mitsubishi Eclipse GS GST 2.0L (4G63-4G63T) DOHC 16 Intake 35mm Stainless Race Flo Val
$281.58 excl. VAT

Valve-R/M NISSAN GT-R 37.15mm

man11190-12
Manley Nissan GT-R 3.8L (VR38DETT) DOHC 37.15mm Race Master Intake Valves (Set of 24)
$586.50 excl. VAT

Valve-R/M NISSAN GT-R 38.15mm

man11192-12
Manley Nissan GTR VR38DETT Race Master Intake Valves
$577.80 excl. VAT

Valve-R/M NISSAN PATROL 35.5mm

man11181-12
Manley Nissan Patrol 35.5mm Race Master Exhaust Valves (Set of 12)
$631.01 excl. VAT

Valve-R/M NISSAN PATROL 35mm

man11179-12
Manley Nissan Patrol 35mm Race Master Exhaust Valves (Set of 12)
$620.30 excl. VAT

Valve-R/M NISSAN PATROL 35mm

man11177-12
Manley Nissan Patrol 35mm Race Master Exhaust Valves (Set of 12)
$620.30 excl. VAT

Valve-R/M NISSAN RB30E/T 35.1mm

man11185-6
Manley Nissan 3.0L RB30E Exhaust Valve Kit - 35.10mm Head Dia. 124.59mm O/A Length, 0.3136in Stem
$212.64 excl. VAT

Valve-R/M NISSAN RB30E/T 36.1mm

man11187-6
Manley Nissan 3.0L RB30E Exhaust Valve Kit - 36.10mm Head Dia. 124.59mm O/A Length, 0.3136in Stem
$212.64 excl. VAT

Valve-R/M NISSAN RB30E/T 42.1mm

man11182-6
Manley Nissan 3.0L RB30E intake Valve Kit - 42.10mm Head Dia. 125.68mm O/A Length, 0.2750in Stem
$212.64 excl. VAT

Valve-R/M NISSAN RB30E/T 43.1mm

man11184-6
Manley Nissan 3.0L RB30E intake Valve Kit - 43.10mm Head Dia. 125.68mm O/A Length, 0.2750in Stem
$212.64 excl. VAT

Valve-R/M RB26DET(T) 30.15mm

man11163-12
Manley Nissan 2.6L Inline 6-24 Valve (RB26DET/T) Exhaust 30.15mm Stainless Race Flo Valves
$586.50 excl. VAT

Valve-R/M RB26DET(T) 30.15mm

man11163-1
Manley Nissan 2.6L Inline 6-24 Valve (RB26DET/T) Exhaust 30.15mm Stainless Race Flo Valve (SINGLE)
$58.20 excl. VAT

Valve-R/M RB26DET(T) 31.15mm

man11165-12
Manley Nissan 2.6L Inline 6-24 Valve RB26DET/T 31.15mm Stainless Race Flo Exhaust Valves
$586.50 excl. VAT

Valve-R/M RB26DET(T) 34.6mm

man11162-12
Manley Nissan 2.6L Inline 6-24 Valve (RB26DET/T) Intake 34.6mm Stainless Race Flo Valves
$419.50 excl. VAT

Valve-R/M RB26DET(T) 34.6mm

man11162-1
Manley Nissan 2.6L Inline 6-24 Valve (RB26DET/T) Intake 34.6mm Stainless Race Flo Valve (SINGLE)
$43.10 excl. VAT

Valve-R/M RB26DET(T) 35.6mm

man11164-12
Manley Nissan 2.6L Inline 6-24 Valve RB26DET(T) 35.6mm Stainless Race Flo Intake Valve
$419.50 excl. VAT

Valve-R/M SE-R 30.15mm

man11109-8
Manley Nissan 2.0L SR20DE Exhaust Valve Kit - 30.15mm Head Dia. 102.40mm O/A Length, 0.2362in Stem
$281.58 excl. VAT

Valve-R/M SE-R 31.15mm

man11111-8
Manley 91-98 Nissan Sentra SE-R 2.0L DOHC 16V 31.15mm Head Dia Race Master Exhaust Valves (Set of 8)
$281.58 excl. VAT

Valve-R/M SE-R 34.15mm

man11110-8
Manley 91-98 Nissan Sentra SE-R 2.0L SR20DE/DET 34.15mm Stainless Race Flo Intake Valves
$281.58 excl. VAT

Valve-R/M SE-R 34.15mm

man11110-1
Manley 91-98 Nissan Sentra SE-R 2.0L SR20DE/DET 34.15mm Stainless Race Flo Intake Valve (Single)
$42.49 excl. VAT

Valve-R/M SE-R 35.15mm

man11112-8
Manley 91-98 Nissan Sentra SE-R 2.0L DOHC 16V 35.15mm Head Dia Race Flo Intake Valve (Set of 8)
$281.58 excl. VAT