0

Heat Protection

Are hoses, wiring or the intake suffering from the heat of the exhaust manifold and turbo? Heat protection can keep the heat where it is generated and lower the temperature in the engine bay and under the car. This category is for you if you have a project with a turbo, headers or new piping, and for you if you want to protect the original parts.

What does heat protection do?

The parts work in two ways: they insulate the heat source itself, or they shield whatever needs protecting. Exhaust wrap is wound around pipes and headers, while turbo blankets – e.g. from Torque Solution and COBB – are fitted around the turbo housing. Torque Solution also offers blankets for intake pipes. Heat shields and insulation mats sit between the heat source and e.g. the floor, seat or bonnet – DEI, for example, offers insulation for the underside of the bonnet. A cooler intake can give more consistent performance, but the effect depends on the car and placement.

How to choose heat protection

Choose based on several factors rather than simply the thickest insulation:

  • Placement: Insulation at the source or a shield at the exposed part – some projects need both.
  • Temperature: Check the product's stated temperature limit against the distance to the exhaust manifold or turbo.
  • Fit: A turbo blanket must fit your turbo housing, e.g. a T6 flange. Wrap comes in several lengths, e.g. 15, 25, 50 and 100 ft, so measure the pipes first.
  • Space: Insulation takes up space, and there must still be clearance to hoses, wiring and bodywork.

Installation and maintenance

Wrap is typically wound tightly with overlap and secured with stainless ties. Follow the manufacturer's instructions, and expect new wrap to smoke a little the first few times it gets hot. Wrap can trap moisture against the pipe, so inspect pipes and welds regularly, especially on headers. Blankets should fit snugly without pinching sensors or wiring. Besides DEI and Torque Solution, you will also find Mishimoto and Injen in this category.

Frequently asked questions

Should I choose exhaust wrap or a heat shield?

Wrap insulates the pipe itself and keeps the heat inside the exhaust, while a shield protects a specific part from radiant heat. If the problem is in one spot, e.g. at a hose or the floor, a shield may be enough; if the entire piping needs insulating, wrap is the more obvious choice.

Can exhaust wrap damage the pipes?

It can. Wrap traps moisture and heat, which can accelerate corrosion, especially on thin-walled pipes and welds. The risk depends on pipe material and usage, so inspect the pipes regularly and replace the wrap if it is saturated with oil or dirt.

Does heat protection affect inspections and approval?

It depends on the product and the car. Shields and insulation must not be loose or cover inspection points. Check the requirements and any approval for the specific part number before you install.

View as Grid List
Sort by
Display per page

Onyx Shield 3.5x6.5

dei902457
DEI Flex Heatshield Gen III 3.5x6.5
401,94 € excl. VAT

Stainless Pipe Shield

dei10255
DEI Pipe Shield - 6in x 12in
1.000,30 € excl. VAT

Starter Shield ONYX Series

dei10236
DEI Starter Shield 2ft x 7in Wide - Onyx
634,06 € excl. VAT

Ti Exhaust Wrap 1x100

dei10133
DEI Exhaust Wrap 1in x 100ft - Titanium
643,25 € excl. VAT

Ti Exhaust Wrap 1x15

dei10128
DEI Exhaust Wrap 1in x 15ft - Titanium
161,22 € excl. VAT

Ti Exhaust Wrap 1x50

dei10126
DEI Exhaust Wrap 1in x 50ft - Titanium
337,11 € excl. VAT

Ti Exhaust Wrap 2x100

dei10130
DEI Exhaust Wrap 2in x 100ft - Titanium
942,70 € excl. VAT

Ti Exhaust Wrap 2x15

dei10129
DEI Exhaust Wrap 2in x 15ft - Titanium
211,95 € excl. VAT

Ti Exhaust Wrap 2x25

dei10131
DEI Exhaust Wrap 2in x 25ft - Titanium
282,06 € excl. VAT

Ti Exhaust Wrap 2x35

dei10132
DEI Exhaust Wrap 2in x 35ft - Titanium
380,77 € excl. VAT

TitniumPipeSheld 2ft

dei10451
DEI Pipe Shield w/Stainless Steel Clamps - 6in x 24in - Titanium
529,34 € excl. VAT