0

Heat Protection

Are hoses, wiring or the intake suffering from the heat of the exhaust manifold and turbo? Heat protection can keep the heat where it is generated and lower the temperature in the engine bay and under the car. This category is for you if you have a project with a turbo, headers or new piping, and for you if you want to protect the original parts.

What does heat protection do?

The parts work in two ways: they insulate the heat source itself, or they shield whatever needs protecting. Exhaust wrap is wound around pipes and headers, while turbo blankets – e.g. from Torque Solution and COBB – are fitted around the turbo housing. Torque Solution also offers blankets for intake pipes. Heat shields and insulation mats sit between the heat source and e.g. the floor, seat or bonnet – DEI, for example, offers insulation for the underside of the bonnet. A cooler intake can give more consistent performance, but the effect depends on the car and placement.

How to choose heat protection

Choose based on several factors rather than simply the thickest insulation:

  • Placement: Insulation at the source or a shield at the exposed part – some projects need both.
  • Temperature: Check the product's stated temperature limit against the distance to the exhaust manifold or turbo.
  • Fit: A turbo blanket must fit your turbo housing, e.g. a T6 flange. Wrap comes in several lengths, e.g. 15, 25, 50 and 100 ft, so measure the pipes first.
  • Space: Insulation takes up space, and there must still be clearance to hoses, wiring and bodywork.

Installation and maintenance

Wrap is typically wound tightly with overlap and secured with stainless ties. Follow the manufacturer's instructions, and expect new wrap to smoke a little the first few times it gets hot. Wrap can trap moisture against the pipe, so inspect pipes and welds regularly, especially on headers. Blankets should fit snugly without pinching sensors or wiring. Besides DEI and Torque Solution, you will also find Mishimoto and Injen in this category.

Frequently asked questions

Should I choose exhaust wrap or a heat shield?

Wrap insulates the pipe itself and keeps the heat inside the exhaust, while a shield protects a specific part from radiant heat. If the problem is in one spot, e.g. at a hose or the floor, a shield may be enough; if the entire piping needs insulating, wrap is the more obvious choice.

Can exhaust wrap damage the pipes?

It can. Wrap traps moisture and heat, which can accelerate corrosion, especially on thin-walled pipes and welds. The risk depends on pipe material and usage, so inspect the pipes regularly and replace the wrap if it is saturated with oil or dirt.

Does heat protection affect inspections and approval?

It depends on the product and the car. Shields and insulation must not be loose or cover inspection points. Check the requirements and any approval for the specific part number before you install.

View as Grid List
Sort by
Display per page

Injen Heat Shield

injHS5000P
Injen Aluminum Air Filter Heat Shield Universal Fits 2.50 2.75 3.00 Polished
628,83 € excl. VAT

Injen Heat Shield

injHS3500BLK
Injen Aluminum Air Filter Heat Shield Universal Fits 3.50 Black
630,84 € excl. VAT

Injen Heat Shield

injHS5000BLK
Injen Aluminum Air Filter Heat Shield Universal Fits 2.50 2.75 3.00 Black
628,65 € excl. VAT

Mishimoto MMHP-TB-T25T28

misMMHP-TB-T25T28
Mishimoto Titanium Turbo Blanket T25/T28
1.179,40 € excl. VAT

Mishimoto MMHP-TB-T6

misMMHP-TB-T6
Mishimoto Titanium Turbo Blanket T6
1.780,51 € excl. VAT

Mishimoto MMTB-CIV-16

misMMTB-CIV-16
Mishimoto 16+ Honda Civic 1.5T Turbo Blanket
1.144,01 € excl. VAT

Mishimoto MMTB-DMAX-01

misMMTB-DMAX-01
Mishimoto 01-04 Chevrolet/GMC 6.6L Duramax Turbo Blanket
1.611,50 € excl. VAT

Mishimoto MMTB-DMAX-05

misMMTB-DMAX-05
Mishimoto 2004.5-2016 Chevrolet/GMC 6.6L Duramax Turbo Blanket
1.541,81 € excl. VAT

Mishimoto MMTB-MUS4-15

misMMTB-MUS4-15
Mishimoto Ford 2015+ Mustang EcoBoost/16-19 Focus RS Turbo Blanket
1.586,87 € excl. VAT

Mishimoto MMTB-RAM-96

misMMTB-RAM-96
Mishimoto 96-02 Dodge Ram 5.9L Cummins Turbo Blanket
1.386,12 € excl. VAT

Mishimoto MMTB-WRX-15

misMMTB-WRX-15
Mishimoto 15+ Subaru WRX Turbo Blanket
1.258,16 € excl. VAT

SS Heat Shield Pad 12x12

dei10258
DEI Pad Shield - 12in x 12in
918,81 € excl. VAT

SS Heat Shield Pad 4x8

dei10257
DEI Pad Shield - 8in x 4in
584,81 € excl. VAT

SS Pipe Shield 4.5x8.5

dei10254
DEI Pipe Shield - 8.5in x 4.5in
809,52 € excl. VAT

Ti Knit Exhaust Sleeve 3x12

dei10049
DEI Exhaust Wrap 2.5 to 3in x 12ft - Titanium
264,00 € excl. VAT

Ti Turbo Shield/Blanket T3 Shield

dei10140
DEI Turbo Shield T3 - Shield Only - Titanium
1.635,95 € excl. VAT