0

Heat Protection

Are hoses, wiring or the intake suffering from the heat of the exhaust manifold and turbo? Heat protection can keep the heat where it is generated and lower the temperature in the engine bay and under the car. This category is for you if you have a project with a turbo, headers or new piping, and for you if you want to protect the original parts.

What does heat protection do?

The parts work in two ways: they insulate the heat source itself, or they shield whatever needs protecting. Exhaust wrap is wound around pipes and headers, while turbo blankets – e.g. from Torque Solution and COBB – are fitted around the turbo housing. Torque Solution also offers blankets for intake pipes. Heat shields and insulation mats sit between the heat source and e.g. the floor, seat or bonnet – DEI, for example, offers insulation for the underside of the bonnet. A cooler intake can give more consistent performance, but the effect depends on the car and placement.

How to choose heat protection

Choose based on several factors rather than simply the thickest insulation:

  • Placement: Insulation at the source or a shield at the exposed part – some projects need both.
  • Temperature: Check the product's stated temperature limit against the distance to the exhaust manifold or turbo.
  • Fit: A turbo blanket must fit your turbo housing, e.g. a T6 flange. Wrap comes in several lengths, e.g. 15, 25, 50 and 100 ft, so measure the pipes first.
  • Space: Insulation takes up space, and there must still be clearance to hoses, wiring and bodywork.

Installation and maintenance

Wrap is typically wound tightly with overlap and secured with stainless ties. Follow the manufacturer's instructions, and expect new wrap to smoke a little the first few times it gets hot. Wrap can trap moisture against the pipe, so inspect pipes and welds regularly, especially on headers. Blankets should fit snugly without pinching sensors or wiring. Besides DEI and Torque Solution, you will also find Mishimoto and Injen in this category.

Frequently asked questions

Should I choose exhaust wrap or a heat shield?

Wrap insulates the pipe itself and keeps the heat inside the exhaust, while a shield protects a specific part from radiant heat. If the problem is in one spot, e.g. at a hose or the floor, a shield may be enough; if the entire piping needs insulating, wrap is the more obvious choice.

Can exhaust wrap damage the pipes?

It can. Wrap traps moisture and heat, which can accelerate corrosion, especially on thin-walled pipes and welds. The risk depends on pipe material and usage, so inspect the pipes regularly and replace the wrap if it is saturated with oil or dirt.

Does heat protection affect inspections and approval?

It depends on the product and the car. Shields and insulation must not be loose or cover inspection points. Check the requirements and any approval for the specific part number before you install.

View as Grid List
Sort by
Display per page

Versa Shield Starter Shield

dei10908
DEI Versa-Shield (Starter Shield) 7in x 2ft Universal Heat Shield
275,74 € excl. VAT

14-24 Pioneer 700 & 700-4 Kit

dei902110
DEI 14-20 Honda Pioneer 700 Heat Shield Kit
885,36 € excl. VAT

19-24 Honda Talon 1000/1000-4 Kit

dei902111
DEI 19-20 Honda Talon 1000 (2-Seater) Heat Control Kit
642,70 € excl. VAT

97-04 Jeep 4.0L I6 Fuel Rail Kit

dei10378
DEI Fuel Rail and Injecter Cover Jeep 1997 - 2004 4.0L Engine
615,27 € excl. VAT

C7 Corvette Oil Cooler Line Cover

dei10488
DEI Corvette C7 Oil Cooler Line Sleeves 2in - 2-1/2in x 18in Heat Shroud
210,18 € excl. VAT

Floor & Tunnel (Non-Adhesive) 24x42

dei50506
DEI DEI Floor and Tunnel Shield II 42in x 2ft - 7.0 sq ft - Non PSA
461,47 € excl. VAT

Floor & Tunnel (Non-Adhesive) 42x48

dei50520
DEI Floor & Tunnel Shield II (Non-Adhesive) - 42in x 48in
812,07 € excl. VAT

Floor & Tunnel Shield II 10x10

dei95503
DEI DEI Floor and Tunnel Shield II 10in x 10in - .83 sq ft
132,27 € excl. VAT

Floor & Tunnel Shield II 42x48

dei50503
DEI Floor and Tunnel Shield II 42in x 4ft - 14.0 sq ft
1.500,09 € excl. VAT

Heat Shield Liner 17+ HD FLH/FLT/FLR

dei901045
DEI 17-22 Harley-Davidson FLH/FLT/FLR Heat Shield Liner Kit
506,05 € excl. VAT

Hub and Rotor Cover

dei10485
DEI Hub and Rotor Cover
583,90 € excl. VAT

Injen Heat Shield

injHS3500P
Injen Aluminum Air Filter Heat Shield Universal Fits 3.50 Polished
630,79 € excl. VAT