0

Metric Adapters

Does the AN fitting on your hose not match the metric thread on your pump, filter or engine? Metric adapters bridge the gap between the two standards, so you can complete the plumbing in your project without swapping components.

What does a metric adapter do?

The adapter has an AN male end and a metric female thread, so an AN fitting and hose can be connected to a part with a metric male thread. We stock adapters from Vibrant, e.g. AN -8 to M14 x 1.5 and AN -8 to M16 x 1.5.

How to choose the right adapter

  • Thread diameter: M14 and M16 look similar but do not fit together – measure or check the component's specification.
  • Pitch: stated as "x 1.5"; the wrong pitch can damage the thread.
  • AN size: must match the hose and fitting, e.g. -8.
  • Sealing: depends on the component, e.g. a washer or O-ring.

If the port has an imperial thread instead, you'll find solutions under NPT fittings and ORB fittings, and the rest of the range is under fittings and adapters. Tighten according to the manufacturer's instructions and check the connection for leaks after the first drive.

Frequently asked questions

How can I tell whether the port is M14 or M16?

Measure the outside diameter of the thread with a caliper and check the pitch with a thread gauge. M14 x 1.5 and M16 x 1.5 have the same pitch, so it's the diameter that determines which adapter you need.

Should I use thread tape on the metric thread?

It depends on the component. Metric ports typically seal with a washer or O-ring rather than the thread itself, and thread tape should normally be avoided here. Check what the port is designed for.

What is the difference between a metric adapter and an AN fitting?

An AN fitting typically connects hose to hose or to an AN port. A metric adapter converts from AN to metric thread, so you can use AN hoses on parts with metric ports.

View as Grid List
Sort by
Display per page

NONEXTRUDEDALFITTING

vib16787
Vibrant Male AN to Female Metric Adapter AN -8 Metric M14 x 1.5
$146.83 excl. VAT

NONEXTRUDEDALFITTING

vib16788
Vibrant Male AN to Female Metric Adapter AN -8 Metric M16 x 1.5
$146.76 excl. VAT