0

Water/Methanol Injection Kits

Does your intake temperature climb as boost pressure goes up? With water/methanol injection, a fine mist is sprayed into the intake air, which can lower the temperature and reduce the risk of knock. Here you'll find complete kits, nozzles and controllers for you who have a turbocharged or supercharged engine and want more stable performance under load.

How water/methanol injection works

A system typically consists of a tank, pump, lines, one or more nozzles and a controller that determines when and how much fluid is injected. As the water evaporates, it absorbs heat from the air, so the intake air can become cooler and denser, and the methanol can also increase knock resistance. The effect depends on the engine, boost pressure and the engine management tune, and the system typically complements your other air and fuel cooling. In this category you'll find brands such as AEM, Snow Performance and Nitrous Express.

How to choose kit, nozzles and controller

  • Complete kit or individual parts: complete water/methanol kits bring the parts together in one package, and some are available without a tank if you have room for your own.
  • Controller: the AEM V3 kit has an internal MAP sensor up to 2.4 bar (35 psi) and is also available in a Multi Input version. Snow Performance offers, for example, a Stage 2 kit with a programmable controller. See also water/methanol controllers.
  • Nozzles: the flow must match the engine's power and airflow – too much fluid can cause misfires, too little gives poor cooling. Find water/methanol nozzles in several sizes.
  • Tank and lines: for example AEM with a 3.8-litre tank and built-in level sensor, or Snow Performance with stainless braided line and 4AN fittings.

Installation and maintenance

Nozzle placement in the intake depends on the project, and lines should be routed away from heat and moving parts. Regularly check the filter, nozzle and connections for clogging and leaks, and remember that pure water can freeze in the tank during winter. If you raise your power target significantly, also check whether your fuel pumps and regulators can keep up.

Frequently asked questions

Should I use pure water or a mix of water and methanol?

It depends on the system and your project. Pure water can cool the intake air, while methanol can also increase knock resistance but is flammable. Follow the manufacturer's recommended mixing ratio, and use distilled water so the nozzle and filter don't scale up.

Can water/methanol injection replace an intercooler?

Typically not. The injection only works when the controller activates it, for example at high boost, while the intercooler cools all the time. The two solutions often complement each other, and the need depends on the engine and power target.

What happens if the tank runs dry?

If the engine management is tuned for fluid being injected, an empty tank can increase the risk of knock. A tank with a level sensor, as in the AEM V3 kit with a 3.8-litre tank, makes it easier to keep an eye on the level.

Can I fit water/methanol injection to a road-registered car?

It depends on the product and the car. Modifications that affect engine performance may require inspection and approval, so check the documentation for the specific part number and clarify it with a vehicle inspection centre before installation.

View as Grid List
Sort by
Display per page

Meth Inject System - SNO-211

snoSNO-211
Snow Performance 2.5 Boost Cooler Water Methanol Injection Kit
5.523,91 € excl. VAT

Meth Inject System - SNO-2110-BRD

snoSNO-2110-BRD
Snow Performance 05-14 STI Stg 2 Boost Cooler Water Injection Kit w/SS Brd Line & 4AN Fittings
7.293,72 € excl. VAT

Meth Inject System - SNO-2133-BRD

snoSNO-2133-BRD
Snow Performance 11-17 F-150 Stg 2 Boost Cooler Water Injection Kit w/SS Brd Line & 4AN Fittings
7.305,76 € excl. VAT

Meth Inject System - SNO-2160-BRD

snoSNO-2160-BRD
Snow Performance 10-15 Camaro Stg 2 Boost Cooler F/I Water Injection Kit (SS Braided Line & 4AN)
7.295,66 € excl. VAT

Meth Inject System - SNO-2161-BRD

snoSNO-2161-BRD
Snow Performance 16-17 Camaro Stg 2 Boost Cooler F/I Water Injection Kit (SS Braided Line & 4AN)
7.298,70 € excl. VAT

Meth Inject System - SNO-2170-BRD

snoSNO-2170-BRD
Snow Performance 08+ Charger Stg 2 Boost Cooler F/I Water Injection Kit (SS Braided Line & 4AN)
7.296,51 € excl. VAT

Meth Inject System - SNO-2182-BRD

snoSNO-2182-BRD
Snow Performance Stage 2 Boost Cooler 2015+ Subaru WRX (Non-STI) Water Injection System
7.278,33 € excl. VAT

Meth Inject System - SNO-310-BRD

snoSNO-310-BRD
Snow Performance Stg 3 Boost Cooler EFI 2D MAP Prog. Water Injection Kit (SS Braided Line & 4AN)
6.407,09 € excl. VAT

Meth Inject System - SNO-320

snoSNO-320
Snow Performance Boost Cooler Stg 3 DI 2D Map Progressive Water Injection Kit
5.626,02 € excl. VAT

Meth Inject System - SNO-410

snoSNO-410
Snow Performance Stage 2 Boost Cooler 07-17 Cummins 6.7L Diesel Water Injection Kit
6.729,10 € excl. VAT

Meth Inject System - SNO-430

snoSNO-430
Snow Performance Stage 2 Boost Cooler Chevy/GMC Duramax Diesel Water Injection Kit
6.803,23 € excl. VAT

Meth Inject System - SNO-500

snoSNO-500
Snow Performance Stage 3 Boost Cooler 94-07 Cummins 5.9L Diesel Water Injection Kit
8.323,94 € excl. VAT

Meth Inject System - SNO-50100

snoSNO-50100
Snow Performance Stg 3 Boost Cooler Water Injection Kit TD (Red Hi-Temp Tubing and Quick Fittings)
8.312,26 € excl. VAT

Meth Inject System - SNO-50100-BRD

snoSNO-50100-BRD
Snow Performance Stg 3 Boost Cooler Water Injection Kit TD Univ. (SS Braided Line and 4AN Fittings)
8.566,17 € excl. VAT

Meth Inject System - SNO-510

snoSNO-510
Snow Performance Stage 3 Boost Cooler 07-17 Cummins 6.7L Diesel Water Injection Kit
8.305,51 € excl. VAT

Meth Inject System - SNO-530

snoSNO-530
Snow Performance Stage 3 Boost Cooler Chevy/GMC Duramax Diesel Water Injection Kit
8.330,33 € excl. VAT

Nozzle Holder - SNO-810-BRD

snoSNO-810-BRD
Snow Performance 1/8in NPT Female to 4AN Male Low Profile Straight Nozzle Holder
205,01 € excl. VAT

Water-Meth Nozzle - SNO-N0200

snoSNO-N0200
Snow Performance Water Methanol Injection Nozzle 2GPH
288,21 € excl. VAT

Water-Meth Nozzle - SNO-N1200

snoSNO-N1200
Snow Performance Water Methanol Injection Nozzle 12GPH
288,33 € excl. VAT

Water-Meth Nozzle - SNO-N2500

snoSNO-N2500
Snow Performance Water Methanol Injection Nozzle 25GPH
288,26 € excl. VAT

CO2 Pressure System - SNO-350

snoSNO-350
Snow Performance CO2 Boost Control Pressure System
2.907,00 € excl. VAT

H2O INJ KIT V3 INT HD NOTANK

aem30-3303
AEM V3 WATER/METHANOL HD KIT - NO RESERVOIR (Internal Map)
4.918,74 € excl. VAT

Meth Inject System - SNO-15025-BRD

snoSNO-15025-BRD
Snow Performance 4150 Flange Gas Stage 1 Naturally Aspirated Water Inj Kit (SS Braided 4AN Fittings)
5.994,14 € excl. VAT

Meth Inject System - SNO-15025-BRD-T

snoSNO-15025-BRD-T
Snow Performance 4150 Flange Gas Stage 1 N/A Water Inj Kit (SS Line 4AN Fittings w/o Tank)
5.994,14 € excl. VAT