0

Water/Methanol Injection Kits

Does your intake temperature climb as boost pressure goes up? With water/methanol injection, a fine mist is sprayed into the intake air, which can lower the temperature and reduce the risk of knock. Here you'll find complete kits, nozzles and controllers for you who have a turbocharged or supercharged engine and want more stable performance under load.

How water/methanol injection works

A system typically consists of a tank, pump, lines, one or more nozzles and a controller that determines when and how much fluid is injected. As the water evaporates, it absorbs heat from the air, so the intake air can become cooler and denser, and the methanol can also increase knock resistance. The effect depends on the engine, boost pressure and the engine management tune, and the system typically complements your other air and fuel cooling. In this category you'll find brands such as AEM, Snow Performance and Nitrous Express.

How to choose kit, nozzles and controller

  • Complete kit or individual parts: complete water/methanol kits bring the parts together in one package, and some are available without a tank if you have room for your own.
  • Controller: the AEM V3 kit has an internal MAP sensor up to 2.4 bar (35 psi) and is also available in a Multi Input version. Snow Performance offers, for example, a Stage 2 kit with a programmable controller. See also water/methanol controllers.
  • Nozzles: the flow must match the engine's power and airflow – too much fluid can cause misfires, too little gives poor cooling. Find water/methanol nozzles in several sizes.
  • Tank and lines: for example AEM with a 3.8-litre tank and built-in level sensor, or Snow Performance with stainless braided line and 4AN fittings.

Installation and maintenance

Nozzle placement in the intake depends on the project, and lines should be routed away from heat and moving parts. Regularly check the filter, nozzle and connections for clogging and leaks, and remember that pure water can freeze in the tank during winter. If you raise your power target significantly, also check whether your fuel pumps and regulators can keep up.

Frequently asked questions

Should I use pure water or a mix of water and methanol?

It depends on the system and your project. Pure water can cool the intake air, while methanol can also increase knock resistance but is flammable. Follow the manufacturer's recommended mixing ratio, and use distilled water so the nozzle and filter don't scale up.

Can water/methanol injection replace an intercooler?

Typically not. The injection only works when the controller activates it, for example at high boost, while the intercooler cools all the time. The two solutions often complement each other, and the need depends on the engine and power target.

What happens if the tank runs dry?

If the engine management is tuned for fluid being injected, an empty tank can increase the risk of knock. A tank with a level sensor, as in the AEM V3 kit with a 3.8-litre tank, makes it easier to keep an eye on the level.

Can I fit water/methanol injection to a road-registered car?

It depends on the product and the car. Modifications that affect engine performance may require inspection and approval, so check the documentation for the specific part number and clarify it with a vehicle inspection centre before installation.

View as Grid List
Sort by
Display per page

Meth Inject System - SNO-15025-T

snoSNO-15025-T
Snow Performance Water Injection Gas Stage 1 Naturally Aspirated Carbureted w/o Tank
5.257,05 € excl. VAT

Meth Inject System - SNO-15026

snoSNO-15026
Snow Performance Stage 2.5 Forced Induction Progressive Water-Methanol Injection Kit
6.046,38 € excl. VAT

Meth Inject System - SNO-15026-T

snoSNO-15026-T
Snow Performance Stage 2.5 Forced Induction Progressive Water-Methanol Injection Kit w/o Tank
6.033,37 € excl. VAT

Meth Inject System - SNO-15035-BRD

snoSNO-15035-BRD
Snow Performance Gas Carbureted 4500 Flange Stage 1 Water Inj Kit (WOT Activated SS Braided Lines)
6.319,02 € excl. VAT

Meth Inject System - SNO-15035-BRD-T

snoSNO-15035-BRD-T
Snow Performance Gas Carb 4500 Flange Stage 1 Water Injection Kit (WOT SS Braided Lines w/o Tank)
6.319,02 € excl. VAT

Meth Inject System - SNO-15035-T

snoSNO-15035-T
Snow Performance Water Injection Gas Carbureted 4500 Flange Stage 1 WOT Activated w/o Tank
5.581,93 € excl. VAT

Meth Inject System - SNO-15036-T

snoSNO-15036-T
Snow Performance Water Injection Gas Carbureted 4500 Flange Stage 2 Progressive Vacuum Ref w/o Tank
6.033,37 € excl. VAT

Meth Inject System - SNO-15127H-HCT

snoSNO-15127H-HCT
Snow Performance Stage 2.5 Hellcat/Demon Water Injection System w/Billet Supercharger Lid
29.628,92 € excl. VAT

Meth Inject System - SNO-15127H-HCT-T

snoSNO-15127H-HCT-T
Snow Performance Stage 2.5 Hellcat/Demon Water Injection System w/Billet Supercharger Lid w/o Tank
25.133,34 € excl. VAT

Meth Inject System - SNO-15127H-LT4-T

snoSNO-15127H-LT4-T
Snow Performance Water/Methanol Injection System w/Billet LT4 Supercharger Lid w/o Tank
22.765,36 € excl. VAT

Meth Inject System - SNO-20010-BRD-T

snoSNO-20010-BRD-T
Snow Performance Stg 2 Boost Cooler Prog. Engine Mount Water Inj. Kit (SS Braided Line/4AN) w/o Tank
4.918,37 € excl. VAT

Meth Inject System - SNO-20020-BRD

snoSNO-20020-BRD
Snow Performance Stg 1 Boost Cooler RZR Turbo Water Methanol Injection Kit (SS Braid Line & 4AN)
6.075,64 € excl. VAT

Meth Inject System - SNO-201-BRD-T

snoSNO-201-BRD-T
Snow Performance Stg 1 Boost Cooler F/I Water Inj. Kit (Incl. SS Braided Line/4AN Fittings) w/o Tank
3.815,90 € excl. VAT

Meth Inject System - SNO-201QUAD-BRD

snoSNO-201QUAD-BRD
Snow Performance Stage 1 Water Injection Stainless Steel Braided Line Quad Nozzle Kit
4.361,96 € excl. VAT

Meth Inject System - SNO-201-T

snoSNO-201-T
Snow Performance Gas Stage I The New Boost Cooler Forced Induction Water Injection Kit w/o Tank
3.048,10 € excl. VAT

Meth Inject System - SNO-202

snoSNO-202
Snow Performance Stage 1 Dual Carb (N/A or Forced Induction) Water Injection Kit - Nylon
5.667,02 € excl. VAT

Meth Inject System - SNO-202-BRD

snoSNO-202-BRD
Snow Performance Stage 1 Dual Carb (N/A or Forced Induction) Water Injection Kit w/SS Braided Line
6.578,83 € excl. VAT

Meth Inject System - SNO-210-T

snoSNO-210-T
Snow Performance Gas Stg. 2 New Bst Cooler F/I Water Inj. Kit w/o Tank
4.583,70 € excl. VAT

Meth Inject System - SNO-2110-BRD-T

snoSNO-2110-BRD-T
Snow Performance 05-14 STI Stg 2 Boost Cooler Water Inj. Kit (SS Braided Line/4AN Fittings) w/o Tank
7.194,28 € excl. VAT

Meth Inject System - SNO-211-BRD-T

snoSNO-211-BRD-T
Snow Performance 2.5 Boost Cooler Water Methanol Injection Kit (SS Brded Line/4AN Fittings) w/o Tank
6.986,29 € excl. VAT

Meth Inject System - SNO-211-T

snoSNO-211-T
Snow Performance Stage 2.5 Boost Cooler Forced Induction Progressive Water Injection Kit (w/o Tank)
5.459,75 € excl. VAT

Meth Inject System - SNO-2120-BRD

snoSNO-2120-BRD
Snow Performance 08-15 Evo Stg 2 Boost Cooler Water Injection Kit w/SS Braid Line & 4AN Fittings
7.542,94 € excl. VAT

Meth Inject System - SNO-2120-BRD-T

snoSNO-2120-BRD-T
Snow Performance 08-15 Evo Stg 2 Boost Cooler Water Inj. Kit (SS Braided Line/4AN Fittings) w/o Tank
7.194,28 € excl. VAT

Meth Inject System - SNO-2130-BRD

snoSNO-2130-BRD
Snow Performance 05-10 Mustang Stg 2 Boost Cooler Water Injection Kit (SS Braided Line & 4AN)
7.542,94 € excl. VAT