0

Fittings & Hoses

Which AN size, hose type and fitting does your next fuel or oil project need? In this category we bring together hoses, lines, fittings, plugs, hose clamps, brackets, valves and complete fuel kits. The parts are for you if you are building new lines, relocating components or want leak-free connections that can handle pressure, heat and vibration in the engine bay.

How the plumbing system fits together

A line system for fuel, oil, coolant or vacuum typically consists of three parts: the hose or hard line itself, the fittings and plugs that connect the line to the pump, filter or carburettor, and the clamps and brackets that hold it in place. Check valves control the direction of flow, while shut-off valves close off a line. If you don't want to build everything from scratch, there are complete fuel system kits, e.g. DeatschWerks 6AN PTFE Fuel Line Kit for 4160-style carburettors with pressure gauge.

How to choose hoses and fittings

Start with the fluid, the pressure and the temperature. PTFE hoses are typically used for fuel, but whether a hose suits your fuel depends on the manufacturer's specification for that particular hose. Then choose the size based on the engine's flow requirements and the space you have for routing – a larger size is not automatically better.

  • AN size: e.g. 6AN, 8AN or 10AN must match the hose, the fittings and the component ports.
  • Thread type: AN, NPT, ORB and SAE seal in different ways and require an adapter to connect, e.g. Radium Engineering 10AN ORB to 6AN Male Fitting or DeatschWerks 8AN Long to 7/8-20 Carb Adapter for the carburettor inlet.
  • Angle and design: 90-degree fittings and swivel banjo fittings can shorten line runs and make installation easier in tight spaces.
  • Material and finish: must suit the fluid, the temperature and the rest of the system.

Installation and safe routing

Route the lines away from the exhaust manifold, moving parts and sharp edges, and secure them so vibration doesn't wear the hose. For this you use hose clamps and brackets, e.g. Russell Line Clamp, while protective sleeving such as Convoluted Tubing can shield against chafing. Follow the manufacturer's instructions when assembling fittings onto the hose, and pressure test the system before starting the engine. Check the connections after the first drives and then regularly for moisture, cracks and loose clamps. In this category you will find brands such as Gates, Fragola, DFC, Russell and Vibrant.

Frequently asked questions

Can I mix AN, NPT and ORB fittings?

Not directly. The thread types are different and each seals in its own way. You need an adapter with the correct type at both ends, and you should check that the sizes match both the hose and the component.

Which hose should I use for fuel?

It depends on the fuel type, pressure and temperature. PTFE hoses are typically used for fuel, but always check the manufacturer's specification for the specific hose, especially if you run ethanol-blended fuel.

How do I find the right AN size?

Look at the engine's fuel requirements, the pump and filter ports and the manufacturer's recommendation. Hose, fittings and components must match throughout the whole system; a larger size does not automatically give a better result.

Can I modify the fuel lines on a road car?

It depends on the product and the car. Check the inspection requirements and any approval for the specific part number, and make sure the lines are properly secured and routed safely away from heat and moving parts.

Fittings & Hoses
View as Grid List
Sort by
Display per page

Mishimoto MMHOSE-WRX-15ANCBL

misMMHOSE-WRX-15ANCBL
Mishimoto 2015 Subaru WRX Blue Silicone Radiator Coolant Ancillary Hoses Kit
1.577,01 € excl. VAT

Mishimoto MMHOSE-WRX-15NY

misMMHOSE-WRX-15NY
Mishimoto 2015+ Subaru WRX Silicone Radiator Coolant Hose Kit - Neon Yellow
1.095,66 € excl. VAT

Mishimoto MMHOSE-WRX-22BK

misMMHOSE-WRX-22BK
Mishimoto 2022+ Subaru WRX Black Silicone Hose Kit
1.092,98 € excl. VAT

Mishimoto MMHOSE-XJ6-91BK

misMMHOSE-XJ6-91BK
Mishimoto 91-01 Jeep Cherokee XJ 4.0L Silicone Coolant Hose Kit - Black
1.331,62 € excl. VAT

Mishimoto MMHOSE-XJ6-92BL

misMMHOSE-XJ6-92BL
Mishimoto 91-01 Jeep Cherokee XJ 4.0L Silicone Radiator Hose Kit - Blue
1.346,77 € excl. VAT

Mishimoto MMPSH-YFZ350-87KTBK

misMMPSH-YFZ350-87KTBK
Mishimoto Yamaha YFZ350 Banshee Silicone Radiator Hoses - Black
595,27 € excl. VAT

Mishimoto MMSBH-06120-CS

misMMSBH-06120-CS
Mishimoto 10Ft Stainless Steel Braided Hose w/ -6AN Fittings - Stainless
431,07 € excl. VAT

Mishimoto MMSBH-0636-CB

misMMSBH-0636-CB
Mishimoto 3Ft Stainless Steel Braided Hose w/ -6AN Fittings - Black
209,94 € excl. VAT

Mishimoto MMSBH-10-4NBK

misMMSBH-10-4NBK
Mishimoto Nylon Wrapped Stainless-Steel Braided Hose -10AN 4ft
668,85 € excl. VAT

Mishimoto MMSBH-10-6

misMMSBH-10-6
Mishimoto 6Ft Stainless Steel Braided Hose w/ -10AN Fittings
886,94 € excl. VAT

Mishimoto MMSBH-1072-CB

misMMSBH-1072-CB
Mishimoto 6Ft Stainless Steel Braided Hose w/ -10AN Fittings - Black
352,79 € excl. VAT

Mishimoto MMSPA-3416

misMMSPA-3416
Mishimoto Stainless Steel Sandwich Plate Adapter, 3/4in -16UNF
226,97 € excl. VAT

Mishimoto MMSPA-M20

misMMSPA-M20
Mishimoto Stainless Steel Sandwich Plate Adapter, M20
226,91 € excl. VAT

Mishimoto MMSPF-10ANBK

misMMSPF-10ANBK
Mishimoto Sandwich Plate Fitting M20 x -10AN Black
144,93 € excl. VAT

Molded Coolant Hose

gat23190
Gates 07-17 Jeep Patriot 4-Cyl. 2.4L Upper Molded Coolant Hose
535,84 € excl. VAT

Molded Coolant Hose

gat20662
Gates 85-96 Ford Bronco Eddie Bauer -40 Deg F - 275 Deg F Molded Coolant Hose
187,37 € excl. VAT

Molded Coolant Hose

gat52076
Gates 05-14 Volkswagen Jetta 5-Cyl. 2.5L Heater Inlet Modular (Branched) Molded Coolant Hose
588,27 € excl. VAT

Molded Coolant Hose

gat20860
Gates 79-72 Ford F Series Pickup V8 302 Upper Coolant Hose
274,77 € excl. VAT

Molded Coolant Hose

gat20609
Gates 90-96 Ford F Series 6-Cyl. 4.9L Lower Molded Coolant Hose
261,09 € excl. VAT

Molded Coolant Hose

gat22417
Gates 90-96 Ford F Series 6-Cyl. 4.9L Upper Molded Coolant Hose
373,65 € excl. VAT

Molded Heater Hose

gat12553
Gates 14-21 Tesla Motors Model X Electric 4-Way Valve To Pump Near Chiller Molded Heater Hose
81,73 € excl. VAT

Molded Heater Hose

gat18705
Gates 94-98 Buick Skylark 3.1L 12.5in Centerline Length Small ID Coolant Hose
209,39 € excl. VAT

NITRILE RUBBER HOSE

vib16314
Vibrant -4AN (0.25in ID) Flex Hose for Push-On Style Fittings - 10 Foot Roll
323,73 € excl. VAT

NITRILE RUBBER HOSE

vib16324
Vibrant -4AN (0.25in ID) Flex Hose for Push-On Style Fittings - 20 Foot Roll
583,47 € excl. VAT