0

Fittings & Hoses

Which AN size, hose type and fitting does your next fuel or oil project need? In this category we bring together hoses, lines, fittings, plugs, hose clamps, brackets, valves and complete fuel kits. The parts are for you if you are building new lines, relocating components or want leak-free connections that can handle pressure, heat and vibration in the engine bay.

How the plumbing system fits together

A line system for fuel, oil, coolant or vacuum typically consists of three parts: the hose or hard line itself, the fittings and plugs that connect the line to the pump, filter or carburettor, and the clamps and brackets that hold it in place. Check valves control the direction of flow, while shut-off valves close off a line. If you don't want to build everything from scratch, there are complete fuel system kits, e.g. DeatschWerks 6AN PTFE Fuel Line Kit for 4160-style carburettors with pressure gauge.

How to choose hoses and fittings

Start with the fluid, the pressure and the temperature. PTFE hoses are typically used for fuel, but whether a hose suits your fuel depends on the manufacturer's specification for that particular hose. Then choose the size based on the engine's flow requirements and the space you have for routing – a larger size is not automatically better.

  • AN size: e.g. 6AN, 8AN or 10AN must match the hose, the fittings and the component ports.
  • Thread type: AN, NPT, ORB and SAE seal in different ways and require an adapter to connect, e.g. Radium Engineering 10AN ORB to 6AN Male Fitting or DeatschWerks 8AN Long to 7/8-20 Carb Adapter for the carburettor inlet.
  • Angle and design: 90-degree fittings and swivel banjo fittings can shorten line runs and make installation easier in tight spaces.
  • Material and finish: must suit the fluid, the temperature and the rest of the system.

Installation and safe routing

Route the lines away from the exhaust manifold, moving parts and sharp edges, and secure them so vibration doesn't wear the hose. For this you use hose clamps and brackets, e.g. Russell Line Clamp, while protective sleeving such as Convoluted Tubing can shield against chafing. Follow the manufacturer's instructions when assembling fittings onto the hose, and pressure test the system before starting the engine. Check the connections after the first drives and then regularly for moisture, cracks and loose clamps. In this category you will find brands such as Gates, Fragola, DFC, Russell and Vibrant.

Frequently asked questions

Can I mix AN, NPT and ORB fittings?

Not directly. The thread types are different and each seals in its own way. You need an adapter with the correct type at both ends, and you should check that the sizes match both the hose and the component.

Which hose should I use for fuel?

It depends on the fuel type, pressure and temperature. PTFE hoses are typically used for fuel, but always check the manufacturer's specification for the specific hose, especially if you run ethanol-blended fuel.

How do I find the right AN size?

Look at the engine's fuel requirements, the pump and filter ports and the manufacturer's recommendation. Hose, fittings and components must match throughout the whole system; a larger size does not automatically give a better result.

Can I modify the fuel lines on a road car?

It depends on the product and the car. Check the inspection requirements and any approval for the specific part number, and make sure the lines are properly secured and routed safely away from heat and moving parts.

Fittings & Hoses
View as Grid List
Sort by
Display per page

NONEXTRUDEDALFITTING

vib10820
Vibrant Billet Aluminum Y-Block Fitting with 1/8in NPT Port - 3/8in NPT x 3/8in NPT x 3/8in NPT
259,44 € excl. VAT

NONEXTRUDEDALFITTING

vib10556
Vibrant -16AN 90deg Flare Union Fitting - Aluminum
337,23 € excl. VAT

NONEXTRUDEDALFITTING

vib11374
Vibrant -10AN to 3/8in NPT Female Swivel Straight Adapter Fitting
180,20 € excl. VAT

NONEXTRUDEDALFITTING

vib11377
Vibrant -12AN to 3/4in NPT Female Swivel Straight Adapter Fitting
237,85 € excl. VAT

NONEXTRUDEDALFITTING

vib11240
Vibrant -4AN Barbed Union Fitting
161,47 € excl. VAT

NONEXTRUDEDALFITTING

vib10246
Vibrant -16AN to 1in NPT 45 Degree Elbow Adapter Fitting
337,83 € excl. VAT

NONEXTRUDEDALFITTING

vib11503
Vibrant -3AN Male Banjo Fitting 10mm x 1.5 Metric Aluminum + 2 Washers
265,88 € excl. VAT

NONEXTRUDEDALFITTING

vib26409
Vibrant -12AN Male NPT 45Degree Hose End Fitting - 3/4 NPT
349,14 € excl. VAT

NONEXTRUDEDALFITTING

vib10997
Vibrant Low Profile ORB Port Plug -20 AN
235,96 € excl. VAT

NONEXTRUDEDALFITTING

vib10829
Vibrant -16AN Female to -10AN Male Reducer Adapter
223,32 € excl. VAT

NONEXTRUDEDALFITTING

vib26001
Vibrant -6AN Male NPT Straight Hose End Fitting - 1/4in NPT
153,50 € excl. VAT

NONEXTRUDEDALFITTING

vib16578
Vibrant 45 Degree 1/2in Tube to Male -8AN Flare Adapter w/ Olive Inserts
355,16 € excl. VAT

NONEXTRUDEDALFITTING

vib10616
Vibrant -3AN Bulkhead Adapter Tee Fitting - Anodized Black Only
169,62 € excl. VAT

NONEXTRUDEDALFITTING

vib11570
Vibrant Single -6AN 3/8-20 Aluminum Male Banjo Adapter Assembly
266,07 € excl. VAT

NONEXTRUDEDALFITTING

vib10132
Vibrant Straight Adapter Fitting -3AN x 3/8in NPT
126,20 € excl. VAT

NONEXTRUDEDALFITTING

vib10470
Vibrant -3AN x 1/8in NPT Flare to Pipe On Run Tee Adapter Fitting - Aluminum
134,71 € excl. VAT

NONEXTRUDEDALFITTING

vib22410
Vibrant -10AN Push-On 45 Deg Hose End Fitting - Aluminum
217,00 € excl. VAT

NONEXTRUDEDALFITTING

vib24407
Vibrant Male -10AN 45 Degree Hose End Fitting - 3/4-16 Thread (8)
323,24 € excl. VAT

NONEXTRUDEDALFITTING

vib26008
Vibrant -12AN Male NPT Straight Hose End Fitting - 1/2 NPT
271,79 € excl. VAT

NONEXTRUDEDALFITTING

vib11362
Vibrant -12AN to 3/4in NPT Male Swivel 90 Degree Adapter Fitting
334,12 € excl. VAT

NONEXTRUDEDALFITTING

vib29988
Vibrant Forged Aluminum Non Swivel Hose End for PTFE Lined Hose Size -8AN
306,39 € excl. VAT

NONEXTRUDEDALFITTING

vib24104
Vibrant -10AN Banjo Hose End Fitting for use with M14 or 9/16in Banjo Bolt - Aluminum Black
225,02 € excl. VAT

NONEXTRUDEDALFITTING

vib24016
Vibrant Male -16AN Flare Straight Hose End Fitting
334,00 € excl. VAT

NONEXTRUDEDALFITTING

vib16629
Vibrant -8AN to 22mm x 1.5 Metric Straight Adapter
125,71 € excl. VAT