0

Fittings & Hoses

Which AN size, hose type and fitting does your next fuel or oil project need? In this category we bring together hoses, lines, fittings, plugs, hose clamps, brackets, valves and complete fuel kits. The parts are for you if you are building new lines, relocating components or want leak-free connections that can handle pressure, heat and vibration in the engine bay.

How the plumbing system fits together

A line system for fuel, oil, coolant or vacuum typically consists of three parts: the hose or hard line itself, the fittings and plugs that connect the line to the pump, filter or carburettor, and the clamps and brackets that hold it in place. Check valves control the direction of flow, while shut-off valves close off a line. If you don't want to build everything from scratch, there are complete fuel system kits, e.g. DeatschWerks 6AN PTFE Fuel Line Kit for 4160-style carburettors with pressure gauge.

How to choose hoses and fittings

Start with the fluid, the pressure and the temperature. PTFE hoses are typically used for fuel, but whether a hose suits your fuel depends on the manufacturer's specification for that particular hose. Then choose the size based on the engine's flow requirements and the space you have for routing – a larger size is not automatically better.

  • AN size: e.g. 6AN, 8AN or 10AN must match the hose, the fittings and the component ports.
  • Thread type: AN, NPT, ORB and SAE seal in different ways and require an adapter to connect, e.g. Radium Engineering 10AN ORB to 6AN Male Fitting or DeatschWerks 8AN Long to 7/8-20 Carb Adapter for the carburettor inlet.
  • Angle and design: 90-degree fittings and swivel banjo fittings can shorten line runs and make installation easier in tight spaces.
  • Material and finish: must suit the fluid, the temperature and the rest of the system.

Installation and safe routing

Route the lines away from the exhaust manifold, moving parts and sharp edges, and secure them so vibration doesn't wear the hose. For this you use hose clamps and brackets, e.g. Russell Line Clamp, while protective sleeving such as Convoluted Tubing can shield against chafing. Follow the manufacturer's instructions when assembling fittings onto the hose, and pressure test the system before starting the engine. Check the connections after the first drives and then regularly for moisture, cracks and loose clamps. In this category you will find brands such as Gates, Fragola, DFC, Russell and Vibrant.

Frequently asked questions

Can I mix AN, NPT and ORB fittings?

Not directly. The thread types are different and each seals in its own way. You need an adapter with the correct type at both ends, and you should check that the sizes match both the hose and the component.

Which hose should I use for fuel?

It depends on the fuel type, pressure and temperature. PTFE hoses are typically used for fuel, but always check the manufacturer's specification for the specific hose, especially if you run ethanol-blended fuel.

How do I find the right AN size?

Look at the engine's fuel requirements, the pump and filter ports and the manufacturer's recommendation. Hose, fittings and components must match throughout the whole system; a larger size does not automatically give a better result.

Can I modify the fuel lines on a road car?

It depends on the product and the car. Check the inspection requirements and any approval for the specific part number, and make sure the lines are properly secured and routed safely away from heat and moving parts.

Fittings & Hoses
View as Grid List
Sort by
Display per page

NONEXTRUDEDALFITTING

vib26407
Vibrant -10AN Male NPT 45Degree Hose End Fitting - 1/2 NPT
299,58 € excl. VAT

NONEXTRUDEDALFITTING

vib10175
Vibrant -8AN to 3/4in NPT 90 Degree Elbow Adapter Fitting
199,05 € excl. VAT

NONEXTRUDEDALFITTING

vib26007
Vibrant -10AN Male NPT Straight Hose End Fitting - 1/2 NPT
197,78 € excl. VAT

NONEXTRUDEDALFITTING

vib10879
Vibrant Reducer Adapter Fitting 0.5in NPT Female x 1in NPT Male
188,59 € excl. VAT

NONEXTRUDEDALFITTING

vib11267
Vibrant Female AN to Hose Barb Straight Adapter AN -4 Barb 0.25in
119,87 € excl. VAT

NONEXTRUDEDALFITTING

vib11226
Vibrant Male NPT to Hose Barb Adapter 45 Degree NPT 1/8in Hose 5/16in
144,56 € excl. VAT

NONEXTRUDEDALFITTING

vib24103
Vibrant -10AN Banjo Hose End Fitting for use with M12 or 7/16in Banjo Bolt - Aluminum Black
268,99 € excl. VAT

NONEXTRUDEDALFITTING

vib24043
Vibrant Single -4AN x 12.5mm ID Banjo to Hose End Aluminum Fitting
208,23 € excl. VAT

NONEXTRUDEDALFITTING

vib10244
Vibrant -12AN to 3/4in NPT 45 Degree Elbow Adapter Fitting
223,19 € excl. VAT

NONEXTRUDEDALFITTING

vib10465
Vibrant -12AN x 3/4in NPT Flare to Pipe Tee Adapter Fitting - Aluminum
296,54 € excl. VAT

NONEXTRUDEDALFITTING

vib11415
Vibrant Male 14mm x 1.5 Metric to 5/16in Barb Fitting
161,40 € excl. VAT

NONEXTRUDEDALFITTING

vib16862
Vibrant -6AN Female to -8AN Male Straight Cut Adapter with O-Ring
142,25 € excl. VAT

NONEXTRUDEDALFITTING

vib10371
Vibrant 1/4in NPT x 1/4in NPT Straight Union Pipe Adapter Fitting - Aluminum
93,90 € excl. VAT

NONEXTRUDEDALFITTING

vib28966S
Vibrant Hose End Socket for PTFE Hose Ends Hose Size -16AN
133,06 € excl. VAT

NONEXTRUDEDALFITTING

vib22304
Vibrant Push-On 30 Degree Hose End Elbow Fitting Size -4AN
189,14 € excl. VAT

NONEXTRUDEDALFITTING

vib11369
Vibrant -6AN to 1/4in NPT Female Swivel Straight Adapter Fitting
131,06 € excl. VAT

NONEXTRUDEDALFITTING

vib28956S
Vibrant -6AN Hose End Socket for PTFE Hose Ends - Chrome
90,19 € excl. VAT

NONEXTRUDEDALFITTING

vib10796
Vibrant -16AN Tee Fitting with Female -16AN Swivel On Side
505,13 € excl. VAT

NONEXTRUDEDALFITTING

vib10299
Vibrant -10AN to 3/4in NPT 90 Degree Elbow Adapter Fitting
221,18 € excl. VAT

NONEXTRUDEDALFITTING

vib16823
Vibrant -4AN Flare to AN Straight Cut Thread (3/4-16) w/ O-Ring Adapter Fitting
134,71 € excl. VAT

NONEXTRUDEDALFITTING

vib20962S
Vibrant -12AN Hose End Socket - Silver
126,43 € excl. VAT

NONEXTRUDEDALFITTING

vib20960
Vibrant -10AN Hose End Socket - Black
112,94 € excl. VAT

NONEXTRUDEDALFITTING

vib11203
Vibrant 1/2in NPT to 5/8in Barb Straight Fitting - Aluminum
148,21 € excl. VAT

NONEXTRUDEDALFITTING

vib20956S
Vibrant -6AN Hose End Socket - Silver
96,64 € excl. VAT