0

Fittings & Hoses

Which AN size, hose type and fitting does your next fuel or oil project need? In this category we bring together hoses, lines, fittings, plugs, hose clamps, brackets, valves and complete fuel kits. The parts are for you if you are building new lines, relocating components or want leak-free connections that can handle pressure, heat and vibration in the engine bay.

How the plumbing system fits together

A line system for fuel, oil, coolant or vacuum typically consists of three parts: the hose or hard line itself, the fittings and plugs that connect the line to the pump, filter or carburettor, and the clamps and brackets that hold it in place. Check valves control the direction of flow, while shut-off valves close off a line. If you don't want to build everything from scratch, there are complete fuel system kits, e.g. DeatschWerks 6AN PTFE Fuel Line Kit for 4160-style carburettors with pressure gauge.

How to choose hoses and fittings

Start with the fluid, the pressure and the temperature. PTFE hoses are typically used for fuel, but whether a hose suits your fuel depends on the manufacturer's specification for that particular hose. Then choose the size based on the engine's flow requirements and the space you have for routing – a larger size is not automatically better.

  • AN size: e.g. 6AN, 8AN or 10AN must match the hose, the fittings and the component ports.
  • Thread type: AN, NPT, ORB and SAE seal in different ways and require an adapter to connect, e.g. Radium Engineering 10AN ORB to 6AN Male Fitting or DeatschWerks 8AN Long to 7/8-20 Carb Adapter for the carburettor inlet.
  • Angle and design: 90-degree fittings and swivel banjo fittings can shorten line runs and make installation easier in tight spaces.
  • Material and finish: must suit the fluid, the temperature and the rest of the system.

Installation and safe routing

Route the lines away from the exhaust manifold, moving parts and sharp edges, and secure them so vibration doesn't wear the hose. For this you use hose clamps and brackets, e.g. Russell Line Clamp, while protective sleeving such as Convoluted Tubing can shield against chafing. Follow the manufacturer's instructions when assembling fittings onto the hose, and pressure test the system before starting the engine. Check the connections after the first drives and then regularly for moisture, cracks and loose clamps. In this category you will find brands such as Gates, Fragola, DFC, Russell and Vibrant.

Frequently asked questions

Can I mix AN, NPT and ORB fittings?

Not directly. The thread types are different and each seals in its own way. You need an adapter with the correct type at both ends, and you should check that the sizes match both the hose and the component.

Which hose should I use for fuel?

It depends on the fuel type, pressure and temperature. PTFE hoses are typically used for fuel, but always check the manufacturer's specification for the specific hose, especially if you run ethanol-blended fuel.

How do I find the right AN size?

Look at the engine's fuel requirements, the pump and filter ports and the manufacturer's recommendation. Hose, fittings and components must match throughout the whole system; a larger size does not automatically give a better result.

Can I modify the fuel lines on a road car?

It depends on the product and the car. Check the inspection requirements and any approval for the specific part number, and make sure the lines are properly secured and routed safely away from heat and moving parts.

Fittings & Hoses
View as Grid List
Sort by
Display per page

NONEXTRUDEDALFITTING

vib11242
Vibrant -8AN Barbed Union Fitting
169,07 € excl. VAT

NONEXTRUDEDALFITTING

vib28512
Vibrant 150 Degree High Flow Hose End Fitting for PTFE Lined Hose -12AN
412,21 € excl. VAT

NONEXTRUDEDALFITTING

vib24426
Vibrant Single -6AN x -6 ORB Male Banjo to Hose End Aluminum Fitting
306,63 € excl. VAT

NONEXTRUDEDALFITTING

vib16945
Vibrant -8AN Male to Male -10AN Straight Cut 45 Degree Adapter Fitting - Anodized Black
295,39 € excl. VAT

NONEXTRUDEDALFITTING

vib10709
Vibrant -8AN x -10AN Female Union Adapter (AN to AN)
161,04 € excl. VAT

NONEXTRUDEDALFITTING

vib21520
Vibrant -20AN 150 Degree Elbow Hose End Fitting
609,13 € excl. VAT

NONEXTRUDEDALFITTING

vib10766
Vibrant -16AN Tube Sleeve Fitting - Aluminum
112,44 € excl. VAT

NONEXTRUDEDALFITTING

vib11585
Vibrant Single -8AN 9/16-20 Aluminum Male Banjo Adapter Assembly
291,37 € excl. VAT

NONEXTRUDEDALFITTING

vib28966R
Vibrant Hose End Socket for PTFE Hose Ends Hose Size -16AN
133,06 € excl. VAT

NONEXTRUDEDALFITTING

vib28958B
Vibrant -8AN Hose End Socket for PTFE Hose Ends - Blue
97,61 € excl. VAT

NONEXTRUDEDALFITTING

vib11370
Vibrant -6AN to 3/8in NPT Female Swivel Straight Adapter Fitting
131,24 € excl. VAT

NONEXTRUDEDALFITTING

vib11581
Vibrant Single -8AN 3/8-24 Aluminum Male Banjo Adapter Assembly
275,31 € excl. VAT

NONEXTRUDEDALFITTING

vib11323
Vibrant 1/2in NPT 90 Degree Female Pipe Coupler Fitting
213,34 € excl. VAT

NONEXTRUDEDALFITTING

vib16447
Vibrant -8AN Female to 0.375in Tube Adapter Fitting (w/Brass Olive Insert)
129,66 € excl. VAT

NONEXTRUDEDALFITTING

vib11573
Vibrant Single -6AN 7/16-24 Aluminum Male Banjo Adapter Assembly
266,31 € excl. VAT

NONEXTRUDEDALFITTING

vib11386
Vibrant -8AN to 1/4in NPT Female Swivel 90 Degree Adapter Fitting
254,39 € excl. VAT

NONEXTRUDEDALFITTING

vib11204
Vibrant 3/4in NPT to 3/4in Barb Straight Fitting - Aluminum
171,50 € excl. VAT

NONEXTRUDEDALFITTING

vib11504
Vibrant -3AN Male Banjo Fitting 12mm x 1.0 Metric Aluminum + 2 Washers
274,88 € excl. VAT

NONEXTRUDEDALFITTING

vib20966S
Vibrant -16AN Hose End Socket - Silver
135,86 € excl. VAT

NONEXTRUDEDALFITTING

vib10606
Vibrant -16AN Bulkhead Adapter 45 Deg Elbow Fitting - Anodized Black
390,44 € excl. VAT

NONEXTRUDEDALFITTING

vib10433
Vibrant -6AN to -10AN Reducer Adapter Fitting - Aluminum
123,76 € excl. VAT

NONEXTRUDEDALFITTING

vib16523
Vibrant Male AN to Female Inverted Flare Adapter AN -6 Inverted Flare 5/8in -18
142,43 € excl. VAT

NONEXTRUDEDALFITTING

vib28960R
Vibrant -10AN Hose End Socket for PTFE Hose Ends - Red
107,34 € excl. VAT

NONEXTRUDEDALFITTING

vib10438
Vibrant -12AN to -6AN Reducer Adapter Fitting - Aluminum
169,73 € excl. VAT