0

Fittings & Hoses

Which AN size, hose type and fitting does your next fuel or oil project need? In this category we bring together hoses, lines, fittings, plugs, hose clamps, brackets, valves and complete fuel kits. The parts are for you if you are building new lines, relocating components or want leak-free connections that can handle pressure, heat and vibration in the engine bay.

How the plumbing system fits together

A line system for fuel, oil, coolant or vacuum typically consists of three parts: the hose or hard line itself, the fittings and plugs that connect the line to the pump, filter or carburettor, and the clamps and brackets that hold it in place. Check valves control the direction of flow, while shut-off valves close off a line. If you don't want to build everything from scratch, there are complete fuel system kits, e.g. DeatschWerks 6AN PTFE Fuel Line Kit for 4160-style carburettors with pressure gauge.

How to choose hoses and fittings

Start with the fluid, the pressure and the temperature. PTFE hoses are typically used for fuel, but whether a hose suits your fuel depends on the manufacturer's specification for that particular hose. Then choose the size based on the engine's flow requirements and the space you have for routing – a larger size is not automatically better.

  • AN size: e.g. 6AN, 8AN or 10AN must match the hose, the fittings and the component ports.
  • Thread type: AN, NPT, ORB and SAE seal in different ways and require an adapter to connect, e.g. Radium Engineering 10AN ORB to 6AN Male Fitting or DeatschWerks 8AN Long to 7/8-20 Carb Adapter for the carburettor inlet.
  • Angle and design: 90-degree fittings and swivel banjo fittings can shorten line runs and make installation easier in tight spaces.
  • Material and finish: must suit the fluid, the temperature and the rest of the system.

Installation and safe routing

Route the lines away from the exhaust manifold, moving parts and sharp edges, and secure them so vibration doesn't wear the hose. For this you use hose clamps and brackets, e.g. Russell Line Clamp, while protective sleeving such as Convoluted Tubing can shield against chafing. Follow the manufacturer's instructions when assembling fittings onto the hose, and pressure test the system before starting the engine. Check the connections after the first drives and then regularly for moisture, cracks and loose clamps. In this category you will find brands such as Gates, Fragola, DFC, Russell and Vibrant.

Frequently asked questions

Can I mix AN, NPT and ORB fittings?

Not directly. The thread types are different and each seals in its own way. You need an adapter with the correct type at both ends, and you should check that the sizes match both the hose and the component.

Which hose should I use for fuel?

It depends on the fuel type, pressure and temperature. PTFE hoses are typically used for fuel, but always check the manufacturer's specification for the specific hose, especially if you run ethanol-blended fuel.

How do I find the right AN size?

Look at the engine's fuel requirements, the pump and filter ports and the manufacturer's recommendation. Hose, fittings and components must match throughout the whole system; a larger size does not automatically give a better result.

Can I modify the fuel lines on a road car?

It depends on the product and the car. Check the inspection requirements and any approval for the specific part number, and make sure the lines are properly secured and routed safely away from heat and moving parts.

Fittings & Hoses
View as Grid List
Sort by
Display per page

Koyorad Overflow fitting

koyPI-2182
Koyo 08-15 Subaru WRX/STI 8mm Coolant Reservoir Adapter (For Part# VH091662)
169,86 € excl. VAT

Koyorad Overflow fitting

koyPI-2183
Koyo 08-15 Subaru WRX/STI / 05-09 Legacy GT 13mm Coolant Reservoir Adapter (For Part# VH091662)
169,92 € excl. VAT

LINE RTNER

rad20-0626
Radium Engineering Nissan S13/S14/S15/R32/R33/R34 Fuel / Brake Line Retainer Kit
1.835,12 € excl. VAT

Lines & Fittings

dwk6-02-0861-20
DeatschWerks 6AN SS Double Braided PTFE Hose 20 Feet
1.177,34 € excl. VAT

Lines & Fittings

dwk6-02-0502
DeatschWerks 6AN ORB Male To 5/16in. Male Triple Barb Fitting (Incl. O-Ring)
122,18 € excl. VAT

Lines & Fittings

dwk6-02-0402
DeatschWerks 8AN ORB Male To 8AN Male Adapter (Incl O-Ring)
108,31 € excl. VAT

Lines & Fittings

dwk6-02-0510
DeatschWerks 8AN ORB Male To 5/16in. Male Barb Fitting (Incl. O-Ring)
136,11 € excl. VAT

Lines & Fittings

dwk6-02-0615
DeatschWerks 6AN Male Flare to M16 X 1.5 Male Metric Adapter (Incl. Crush Washer) - Titanium
87,88 € excl. VAT

Lines & Fittings

dwk6-02-0853
DeatschWerks 6AN Female Swivel 180-Degree Hose End PTFE (Incl. 1 Olive Insert)
261,81 € excl. VAT

Lines & Fittings

dwk6-02-0851
DeatschWerks 6AN Female Swivel 45-Degree Hose End PTFE (Incl. 1 Olive Insert)
257,01 € excl. VAT

Lines & Fittings

dwk6-02-0862-20
DeatschWerks 8AN SS Double Braided PTFE Hose 20 Feet
1.427,47 € excl. VAT

Lines & Fittings

dwk6-02-0864-3
DeatschWerks 6AN Black Nylon Braided PTFE Hose 3 Feet
292,28 € excl. VAT

Lines & Fittings

dwk6-02-0501
DeatschWerks 6AN ORB Male To 3/8in. Male Triple Barb Fitting (Incl. O-Ring)
108,68 € excl. VAT

Lines & Fittings

dwk6-02-0865-20
DeatschWerks 8AN Black Nylon Braided PTFE Hose 20 Feet
1.677,37 € excl. VAT

Lines & Fittings

dwk6-02-0816-20
DeatschWerks 8AN Black Nylon Braided CPE Hose 20 Feet
1.295,50 € excl. VAT

Lines & Fittings

dwk6-02-0854
DeatschWerks 8AN Female Swivel Straight Hose End PTFE (Incl. 1 Olive Insert)
157,21 € excl. VAT

M14 INVRTD FLARE 6AN

rad14-0118
Radium Engineering M14 Inverted Flare to 6AN Adapter Fitting - Honda Style
217,66 € excl. VAT

Magnum FORCE Replacement Coupling Kit

afe59-00045
aFe Magnum FORCE Silicone Replacement Coupling Kit 3.5in ID x 3in Length Straight Coupler w/ Hump
255,00 € excl. VAT

MILD STEEL FITTING

vib11284
Vibrant 3/4in ID Hose Barbed Weld Bung - Mild Steel
100,23 € excl. VAT

MILD STEEL FITTING

vib11280
Vibrant 1/4in ID Hose Barbed Weld Bung - Mild Steel
66,77 € excl. VAT