0

Fittings & Hoses

Which AN size, hose type and fitting does your next fuel or oil project need? In this category we bring together hoses, lines, fittings, plugs, hose clamps, brackets, valves and complete fuel kits. The parts are for you if you are building new lines, relocating components or want leak-free connections that can handle pressure, heat and vibration in the engine bay.

How the plumbing system fits together

A line system for fuel, oil, coolant or vacuum typically consists of three parts: the hose or hard line itself, the fittings and plugs that connect the line to the pump, filter or carburettor, and the clamps and brackets that hold it in place. Check valves control the direction of flow, while shut-off valves close off a line. If you don't want to build everything from scratch, there are complete fuel system kits, e.g. DeatschWerks 6AN PTFE Fuel Line Kit for 4160-style carburettors with pressure gauge.

How to choose hoses and fittings

Start with the fluid, the pressure and the temperature. PTFE hoses are typically used for fuel, but whether a hose suits your fuel depends on the manufacturer's specification for that particular hose. Then choose the size based on the engine's flow requirements and the space you have for routing – a larger size is not automatically better.

  • AN size: e.g. 6AN, 8AN or 10AN must match the hose, the fittings and the component ports.
  • Thread type: AN, NPT, ORB and SAE seal in different ways and require an adapter to connect, e.g. Radium Engineering 10AN ORB to 6AN Male Fitting or DeatschWerks 8AN Long to 7/8-20 Carb Adapter for the carburettor inlet.
  • Angle and design: 90-degree fittings and swivel banjo fittings can shorten line runs and make installation easier in tight spaces.
  • Material and finish: must suit the fluid, the temperature and the rest of the system.

Installation and safe routing

Route the lines away from the exhaust manifold, moving parts and sharp edges, and secure them so vibration doesn't wear the hose. For this you use hose clamps and brackets, e.g. Russell Line Clamp, while protective sleeving such as Convoluted Tubing can shield against chafing. Follow the manufacturer's instructions when assembling fittings onto the hose, and pressure test the system before starting the engine. Check the connections after the first drives and then regularly for moisture, cracks and loose clamps. In this category you will find brands such as Gates, Fragola, DFC, Russell and Vibrant.

Frequently asked questions

Can I mix AN, NPT and ORB fittings?

Not directly. The thread types are different and each seals in its own way. You need an adapter with the correct type at both ends, and you should check that the sizes match both the hose and the component.

Which hose should I use for fuel?

It depends on the fuel type, pressure and temperature. PTFE hoses are typically used for fuel, but always check the manufacturer's specification for the specific hose, especially if you run ethanol-blended fuel.

How do I find the right AN size?

Look at the engine's fuel requirements, the pump and filter ports and the manufacturer's recommendation. Hose, fittings and components must match throughout the whole system; a larger size does not automatically give a better result.

Can I modify the fuel lines on a road car?

It depends on the product and the car. Check the inspection requirements and any approval for the specific part number, and make sure the lines are properly secured and routed safely away from heat and moving parts.

Fittings & Hoses
View as Grid List
Sort by
Display per page

Mishimoto MMCP-2.5HPBK

misMMCP-2.5HPBK
Mishimoto 2.5in Black Hump Hose Coupler
203,85 € excl. VAT

Mishimoto MMCP-25NPTBK

misMMCP-25NPTBK
Mishimoto 2.5in Black Silicone Coupler w/ 1/8in NPT Bung
371,89 € excl. VAT

Mishimoto MMCP-30NPTBK

misMMCP-30NPTBK
Mishimoto 3.0in Black Silicone Coupler w/ 1/8in NPT Bung
372,68 € excl. VAT

Mishimoto MMCP-3HPBK

misMMCP-3HPBK
Mishimoto 3in. Hump Hose Silicone Coupler - Black
244,91 € excl. VAT

Mishimoto MMCP-3HPRD

misMMCP-3HPRD
Mishimoto 3in. Hump Hose Silicone Coupler - Red
246,18 € excl. VAT

Mishimoto MMCP-R45-25275BK

misMMCP-R45-25275BK
Mishimoto Silicone Reducer Coupler 45 Degree 2.5in to 2.75in - Black
378,34 € excl. VAT

Mishimoto MMCP-R45-30325BK

misMMCP-R45-30325BK
Mishimoto Silicone Reducer Coupler 45 Degree 3in to 3.25in - Black
378,22 € excl. VAT

Mishimoto MMCP-R90-2030BL

misMMCP-R90-2030BL
Mishimoto Silicone Reducer Coupler 90 Degree 2in to 3in - Blue
295,14 € excl. VAT

Mishimoto MMCP-R90-2530BK

misMMCP-R90-2530BK
Mishimoto Silicone Reducer Coupler 90 Degree 2.5in to 3in - Black
395,91 € excl. VAT

Mishimoto MMCP-R90-27530BK

misMMCP-R90-27530BK
Mishimoto Silicone Reducer Coupler 90 Degree 2.75in to 3in - Black
382,78 € excl. VAT

Mishimoto MMCP-R90-27530BL

misMMCP-R90-27530BL
Mishimoto Silicone Reducer Coupler 90 Degree 2.75in to 3in - Blue
399,68 € excl. VAT

Mishimoto MMCP-R90-3035BK

misMMCP-R90-3035BK
Mishimoto Silicone Reducer Coupler 90 Degree 3in to 3.5in - Black
424,86 € excl. VAT

Mishimoto MMCP-R90-3540BK

misMMCP-R90-3540BK
Mishimoto Silicone Reducer Coupler 90 Degree 3.5in to 4in - Black
433,56 € excl. VAT

Mishimoto MMDCC-30HBK

misMMDCC-30HBK
Mishimoto Duracore 3in Straight Hump Coupler
545,22 € excl. VAT

Mishimoto MMDCC-35HBK

misMMDCC-35HBK
Mishimoto Duracore 3.5in Straight Hump Coupler
586,14 € excl. VAT

Mishimoto MMDCC-40HBK

misMMDCC-40HBK
Mishimoto Duracore 4in Straight Hump Coupler
618,92 € excl. VAT

Mishimoto MMFT-10-10BK

misMMFT-10-10BK
Mishimoto -10 ORB to -10AN Aluminum Fitting - Black
144,80 € excl. VAT

Mishimoto MMFT-16ORB-12BK

misMMFT-16ORB-12BK
Mishimoto -16ORB to -12AN Aluminum Fitting Black
194,37 € excl. VAT

Mishimoto MMFT-16ORB-1BK

misMMFT-16ORB-1BK
Mishimoto -16ORB to 1in. Hose Barb Aluminum Fitting - Black
243,51 € excl. VAT

Mishimoto MMFT-16ORB-34BK

misMMFT-16ORB-34BK
Mishimoto -16ORB to 3/4in. Hose Barb Aluminum Fitting - Black
243,75 € excl. VAT

Mishimoto MMFT-M16-10SBK

misMMFT-M16-10SBK
Mishimoto 90 Degree Banjo Swivel M16x1.5 1/2in. Barbed Fitting
267,77 € excl. VAT

Mishimoto MMFT-M16-12BK

misMMFT-M16-12BK
Mishimoto 16X1.5 TO 1/2in. Hose Barb Aluminum Fittings (Pack of 2)
167,49 € excl. VAT

Mishimoto MMFT-M20-12BK

misMMFT-M20-12BK
Mishimoto 2pcs. M20x1.5 1/2in Aluminum Catch Can Fittings - Black
161,65 € excl. VAT

Mishimoto MMFT-M20-34BK

misMMFT-M20-34BK
Mishimoto 2pcs. M20x1.5 3/4in Aluminum Catch Can Fitting - Black
161,65 € excl. VAT