0

Fittings & Hoses

Which AN size, hose type and fitting does your next fuel or oil project need? In this category we bring together hoses, lines, fittings, plugs, hose clamps, brackets, valves and complete fuel kits. The parts are for you if you are building new lines, relocating components or want leak-free connections that can handle pressure, heat and vibration in the engine bay.

How the plumbing system fits together

A line system for fuel, oil, coolant or vacuum typically consists of three parts: the hose or hard line itself, the fittings and plugs that connect the line to the pump, filter or carburettor, and the clamps and brackets that hold it in place. Check valves control the direction of flow, while shut-off valves close off a line. If you don't want to build everything from scratch, there are complete fuel system kits, e.g. DeatschWerks 6AN PTFE Fuel Line Kit for 4160-style carburettors with pressure gauge.

How to choose hoses and fittings

Start with the fluid, the pressure and the temperature. PTFE hoses are typically used for fuel, but whether a hose suits your fuel depends on the manufacturer's specification for that particular hose. Then choose the size based on the engine's flow requirements and the space you have for routing – a larger size is not automatically better.

  • AN size: e.g. 6AN, 8AN or 10AN must match the hose, the fittings and the component ports.
  • Thread type: AN, NPT, ORB and SAE seal in different ways and require an adapter to connect, e.g. Radium Engineering 10AN ORB to 6AN Male Fitting or DeatschWerks 8AN Long to 7/8-20 Carb Adapter for the carburettor inlet.
  • Angle and design: 90-degree fittings and swivel banjo fittings can shorten line runs and make installation easier in tight spaces.
  • Material and finish: must suit the fluid, the temperature and the rest of the system.

Installation and safe routing

Route the lines away from the exhaust manifold, moving parts and sharp edges, and secure them so vibration doesn't wear the hose. For this you use hose clamps and brackets, e.g. Russell Line Clamp, while protective sleeving such as Convoluted Tubing can shield against chafing. Follow the manufacturer's instructions when assembling fittings onto the hose, and pressure test the system before starting the engine. Check the connections after the first drives and then regularly for moisture, cracks and loose clamps. In this category you will find brands such as Gates, Fragola, DFC, Russell and Vibrant.

Frequently asked questions

Can I mix AN, NPT and ORB fittings?

Not directly. The thread types are different and each seals in its own way. You need an adapter with the correct type at both ends, and you should check that the sizes match both the hose and the component.

Which hose should I use for fuel?

It depends on the fuel type, pressure and temperature. PTFE hoses are typically used for fuel, but always check the manufacturer's specification for the specific hose, especially if you run ethanol-blended fuel.

How do I find the right AN size?

Look at the engine's fuel requirements, the pump and filter ports and the manufacturer's recommendation. Hose, fittings and components must match throughout the whole system; a larger size does not automatically give a better result.

Can I modify the fuel lines on a road car?

It depends on the product and the car. Check the inspection requirements and any approval for the specific part number, and make sure the lines are properly secured and routed safely away from heat and moving parts.

Fittings & Hoses
View as Grid List
Sort by
Display per page

Mishimoto MMFT-M27-10BK

misMMFT-M27-10BK
MMFT-M27-10BK
178,68 € excl. VAT

Mishimoto MMFT-SW-04P-90

misMMFT-SW-04P-90
Mishimoto Aluminum PTFE -4AN 90 Degree Fitting Black
168,71 € excl. VAT

Mishimoto MMFT-SW-10-45

misMMFT-SW-10-45
Mishimoto Aluminum -10AN 45 Degree Fitting - Black
227,88 € excl. VAT

Mishimoto MMFT-SW-10-ST

misMMFT-SW-10-ST
Mishimoto Aluminum -10AN Straight Fitting - Black
202,40 € excl. VAT

Mishimoto MMHOSE-10100BK

misMMHOSE-10100BK
Mishimoto 10mm x 100cm Black Silicone Hose
278,24 € excl. VAT

Mishimoto MMHOSE-240SX-89KABK

misMMHOSE-240SX-89KABK
Mishimoto 89-98 Nissan 240SX w/ KA Black Silicone Hose Kit
1.074,99 € excl. VAT

Mishimoto MMHOSE-300ZX-90TBK

misMMHOSE-300ZX-90TBK
Mishimoto 90-96 Nissan 300ZX Turbo Black Silicone Radiator Hose Kit
1.363,19 € excl. VAT

Mishimoto MMHOSE-350Z-03BK

misMMHOSE-350Z-03BK
Mishimoto 03-06 Nissan 350Z Black Silicone Hose Kit
1.249,46 € excl. VAT

Mishimoto MMHOSE-350Z-03BL

misMMHOSE-350Z-03BL
Mishimoto 03-06 Nissan 350Z Blue Silicone Hose Kit
1.243,80 € excl. VAT

Mishimoto MMHOSE-370Z-09RD

misMMHOSE-370Z-09RD
Mishimoto 09+ Nissan 370Z Red Silicone Hose Kit
1.246,60 € excl. VAT

Mishimoto MMHOSE-392-21OC

misMMHOSE-392-21OC
Mishimoto 2021+ Jeep JL Rubicon 392 Silicone Oil Cooler Hose
792,49 € excl. VAT

Mishimoto MMHOSE-4RUN34-96BK

misMMHOSE-4RUN34-96BK
Mishimoto 96-02 Toyota 4Runner 3.4L V6 Black Silicone Hose Kit
1.047,06 € excl. VAT

Mishimoto MMHOSE-4RUN34-96HHRBK

misMMHOSE-4RUN34-96HHRBK
Mishimoto 96-02 Toyota 4Runner 3.4L (w/ Rear Heater) Silicone Heater Hose Kit - Black
1.325,91 € excl. VAT

Mishimoto MMHOSE-4RUN34-96HHRBL

misMMHOSE-4RUN34-96HHRBL
Mishimoto 96-02 Toyota 4Runner 3.4L (w/ Rear Heater) Silicone Heater Hose Kit - Blue
1.313,14 € excl. VAT

Mishimoto MMHOSE-4RUN34-96RD

misMMHOSE-4RUN34-96RD
Mishimoto 96-02 Toyota 4Runner 3.4L V6 Red Silicone Hose Kit
1.228,91 € excl. VAT

Mishimoto MMHOSE-500T-12BK

misMMHOSE-500T-12BK
Mishimoto 2012+ Fiat 500 Abarth/Turbo Black Silicone Radiator Hose Kit
1.901,35 € excl. VAT

Mishimoto MMHOSE-BRZ-13BK

misMMHOSE-BRZ-13BK
Mishimoto 12-14 Subaru BRZ / 13 Scion FR-S / 12-14 Toyota GT86 Silicone Radiator Hose Kit - Black
1.165,97 € excl. VAT

Mishimoto MMHOSE-BRZ-13RD

misMMHOSE-BRZ-13RD
Mishimoto 12-14 Subaru BRZ / 13 Scion FR-S / 12-14 Toyota GT86 Silicone Radiator Hose Kit - Red
1.164,80 € excl. VAT

Mishimoto MMHOSE-BRZ-22IHBK

misMMHOSE-BRZ-22IHBK
Mishimoto 2022+ Subaru BRZ / Toyota GR86 Silicone Induction Hose BK
968,98 € excl. VAT

Mishimoto MMHOSE-C4-92TBK

misMMHOSE-C4-92TBK
Mishimoto 92-97 Audi S4/S6 C4 Turbo Black Silicone Hose Kit
2.679,49 € excl. VAT

Mishimoto MMHOSE-CAM8-16BK

misMMHOSE-CAM8-16BK
Mishimoto 16+ Chevy Camaro SS Silicone Radiator Hose Kit - Black
2.300,72 € excl. VAT

Mishimoto MMHOSE-CAM-98BK

misMMHOSE-CAM-98BK
Mishimoto 98-02 Chevy Camaro / Pontiac Firebird Black Silicone Hose Kit (LS1 (V8) Engines Only)
1.280,48 € excl. VAT

Mishimoto MMHOSE-CAM-98RD

misMMHOSE-CAM-98RD
Mishimoto 98-02 Chevy Camaro / Pontiac Firebird Red Silicone Hose Kit (LS1 (V8) Engines Only)
1.282,85 € excl. VAT

Mishimoto MMHOSE-CHV-01DRD

misMMHOSE-CHV-01DRD
Mishimoto 01-05 Chevy Duramax 6.6L 2500 Red Silicone Hose Kit
2.765,97 € excl. VAT