0

Water/Methanol Injection Kits

Does your intake temperature climb as boost pressure goes up? With water/methanol injection, a fine mist is sprayed into the intake air, which can lower the temperature and reduce the risk of knock. Here you'll find complete kits, nozzles and controllers for you who have a turbocharged or supercharged engine and want more stable performance under load.

How water/methanol injection works

A system typically consists of a tank, pump, lines, one or more nozzles and a controller that determines when and how much fluid is injected. As the water evaporates, it absorbs heat from the air, so the intake air can become cooler and denser, and the methanol can also increase knock resistance. The effect depends on the engine, boost pressure and the engine management tune, and the system typically complements your other air and fuel cooling. In this category you'll find brands such as AEM, Snow Performance and Nitrous Express.

How to choose kit, nozzles and controller

  • Complete kit or individual parts: complete water/methanol kits bring the parts together in one package, and some are available without a tank if you have room for your own.
  • Controller: the AEM V3 kit has an internal MAP sensor up to 2.4 bar (35 psi) and is also available in a Multi Input version. Snow Performance offers, for example, a Stage 2 kit with a programmable controller. See also water/methanol controllers.
  • Nozzles: the flow must match the engine's power and airflow – too much fluid can cause misfires, too little gives poor cooling. Find water/methanol nozzles in several sizes.
  • Tank and lines: for example AEM with a 3.8-litre tank and built-in level sensor, or Snow Performance with stainless braided line and 4AN fittings.

Installation and maintenance

Nozzle placement in the intake depends on the project, and lines should be routed away from heat and moving parts. Regularly check the filter, nozzle and connections for clogging and leaks, and remember that pure water can freeze in the tank during winter. If you raise your power target significantly, also check whether your fuel pumps and regulators can keep up.

Frequently asked questions

Should I use pure water or a mix of water and methanol?

It depends on the system and your project. Pure water can cool the intake air, while methanol can also increase knock resistance but is flammable. Follow the manufacturer's recommended mixing ratio, and use distilled water so the nozzle and filter don't scale up.

Can water/methanol injection replace an intercooler?

Typically not. The injection only works when the controller activates it, for example at high boost, while the intercooler cools all the time. The two solutions often complement each other, and the need depends on the engine and power target.

What happens if the tank runs dry?

If the engine management is tuned for fluid being injected, an empty tank can increase the risk of knock. A tank with a level sensor, as in the AEM V3 kit with a 3.8-litre tank, makes it easier to keep an eye on the level.

Can I fit water/methanol injection to a road-registered car?

It depends on the product and the car. Modifications that affect engine performance may require inspection and approval, so check the documentation for the specific part number and clarify it with a vehicle inspection centre before installation.

View as Grid List
Sort by
Display per page

Water-Meth Nozzle - SNO-N0050

snoSNO-N0050
Snow Performance Water Methanol Injection Nozzle 0.5GPH
288,26 € excl. VAT

Water-Meth Nozzle - SNO-N0075

snoSNO-N0075
Snow Performance Water Methanol Injection Nozzle 0.75GPH
288,21 € excl. VAT

Water-Meth Nozzle - SNO-N0100

snoSNO-N0100
Snow Performance Water Methanol Injection Nozzle 1GPH
288,03 € excl. VAT

Water-Meth Nozzle - SNO-N0150

snoSNO-N0150
Snow Performance Water Methanol Injection Nozzle 1.5GPH
288,26 € excl. VAT

Water-Meth Nozzle - SNO-N0250

snoSNO-N0250
Snow Performance Water Methanol Injection Nozzle 2.5GPH
288,26 € excl. VAT

Water-Meth Nozzle - SNO-N0300

snoSNO-N0300
Snow Performance Water Methanol Injection Nozzle 3GPH
288,26 € excl. VAT

Water-Meth Nozzle - SNO-N0350

snoSNO-N0350
Snow Performance Water Methanol Injection Nozzle 3.5GPH
288,26 € excl. VAT

Water-Meth Nozzle - SNO-N0400

snoSNO-N0400
Snow Performance Water Methanol Injection Nozzle 4GPH
288,26 € excl. VAT

Water-Meth Nozzle - SNO-N0400EX

snoSNO-N0400EX
Snow Performance WM/Nozzle 4GPH Extended Nozzle
358,39 € excl. VAT

Water-Meth Nozzle - SNO-N0500

snoSNO-N0500
Snow Performance Water Methanol Injection Nozzle 5GPH
288,26 € excl. VAT

Water-Meth Nozzle - SNO-N0600

snoSNO-N0600
Snow Performance Water-Methanol Injection Nozzle 6GPH
288,26 € excl. VAT

Water-Meth Nozzle - SNO-N0800

snoSNO-N0800
Snow Performance Water Methanol Injection Nozzle 8GPH
288,26 € excl. VAT

Water-Meth Nozzle - SNO-N0900

snoSNO-N0900
Snow Performance Water Methanol Injection Nozzle 9GPH
288,26 € excl. VAT

Water-Meth Nozzle - SNO-N1000

snoSNO-N1000
Snow Performance Water Methanol Injection Nozzle 10GPH
288,26 € excl. VAT

Water-Meth Nozzle - SNO-N1400

snoSNO-N1400
Snow Performance Water Methanol Injection Nozzle 14GPH
288,26 € excl. VAT

Water-Meth Nozzle - SNO-N1600

snoSNO-N1600
Snow Performance Water Methanol Injection Nozzle 16GPH
288,33 € excl. VAT

Water-Meth Nozzle - SNO-N1800

snoSNO-N1800
Snow Performance Water Methanol Injection Nozzle 18GPH
288,26 € excl. VAT

Water-Meth Nozzle - SNO-N2000

snoSNO-N2000
Snow Performance Water Methanol Injection Nozzle 20GPH
288,26 € excl. VAT

Water-Meth Nozzle - SNO-N3000

snoSNO-N3000
Snow Performance Water Methanol Injection Nozzle 30GPH
288,08 € excl. VAT

Water-Meth Nozzle - SNO-N3500

snoSNO-N3500
Snow Performance Water Methanol Injection Nozzle 35GPH
288,26 € excl. VAT

AEM - Water/Meth Injection

aem30-3301
AEM V2 5 Gallon Diesel Water/Methanol Injection Kit (Internal Map)
5.913,62 € excl. VAT

H2O INJ KIT V3 EXT MAP 5GAL

aem30-3351
AEM V2 5 Gallon Diesel Water/Methanol Injection Kit - Multi Input
5.899,39 € excl. VAT

H2O INJ KIT V3 INT MAPNOTANK

aem30-3302
AEM V3 Water/Methanol Injection Kit - NO TANK (Internal Map)
4.145,34 € excl. VAT

Meth Inject System - SNO-210-BRD-T

snoSNO-210-BRD-T
Snow Performance Stg 2 Boost Cooler F/I Prog. Water Injection Kit (SS Braided 4AN Fitting) - No Tank
5.252,80 € excl. VAT